MPM3810GQB-33-Z

MPM3810 6V Input, 1.2A Module Synchronous Step-Down Converter with Integrated Inductor The Future of Analog IC Technology DESCRIPTION FEATURES The MPM3810 is a step-down module converter Wide 2.5V to 6V Operating Input Range with built-in power MOSFETs and inductor. The Fixed and Adjustable Output from 0.6V modules integrated inductor simplifies the power QFN-12 (2.5mmx3.0mmx0.9mm) Package system design and provides easy, efficient use. Total Solution Size 6mm x 3.8mm The DC-DC module comes in a small surface- Up to 1.2A Peak Output Current mount QFN-12 (2.5mmx3.0mmx0.9mm) package 100% Duty Cycle in Dropout and achieves 1.2A peak output current from a Ultra Low IQ: 17A 2.5V to 6V input voltage with excellent load and EN and Power Good for Power Sequencing line regulation. The output voltage is regulated as Cycle-by-Cycle Over-Current Protection low as 0.6V. For adjustable output, only FB Short-Circuit Protection with Hiccup Mode resistors and input and output capacitors are Adjustable Output Only Needs 4 External needed to complete the design. Components: 2 Ceramic Capacitors and FB The constant-on-time control (COT) scheme Divider Resistors provides fast, transient response and eases loop Fixed Output Only Needs Input and Output stabilization. Fault condition protection includes Capacitors cycle-by-cycle current limiting and thermal shutdown (TSD). APPLICATIONS The MPM3810 is ideal for a wide range of Low Voltage I/O System Power applications including high-performance DSPs, LDO Replacement FPGAs, PDAs, portable instruments, and storage. Power for Portable Products Storage (SSD/HDD) Space-Limited Applications All MPS parts are lead-free and adhere to the RoHS directive. For MPS green status, please visit MPS website under Products, Quality Assurance page. MPS and The Future of Analog IC Technology are Registered Trademarks of Monolithic Power Systems, Inc. TYPICAL APPLICATION (Fixed Output) MPM3810 Rev. 1.1 www.MonolithicPower.com 1 12/8/2014 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. 2014 MPS. All Rights Reserved. MPM3810 6V, 1.2A PEAK SIMPLE MODULE WITH INTEGRATED INDUCTOR ORDERING INFORMATION Top Part Number Package Vo Range Marking QFN-12 MPM3810GQB* AEZ Adjustable (2.5mmX3.0mmX0.9mm). QFN-12 MPM3810GQB-12 AGX Fixed 1.2V (2.5mmX3.0mmX0.9mm). QFN-12 MPM3810GQB-18 AGZ Fixed 1.8V (2.5mmX3.0mmX0.9mm). QFN-12 MPM3810GQB-25 AJG Fixed 2.5V (2.5mmX3.0mmX0.9mm). QFN-12 MPM3810GQB-33 AJH Fixed 3.3V (2.5mmX3.0mmX0.9mm). * For Tape & Reel, add suffix Z (e.g. MPM3810GQBZ); PACKAGE REFERENCE MPM3810GQB-12 MPM3810GQB-18 MPM3810GQB MPM3810GQB-25 MPM3810GQB-33 QFN-12 (2.5mmX3.0mmX0.9mm). (1) (4) ABSOLUTE MAXIMUM RATINGS Thermal Resistance JA JC Supply Voltage V ...................................... 6.5V QFN-12 (2.5mmX3.0mm)65 13 C/W IN V .................................................................... SW Notes: -0.3V (-5V for <10ns) to 6.5V (7V for <10ns) 1) Exceeding these ratings may damage the device. All Other Pins ............................... -0.3V to 6.5 V 2) The maximum allowable power dissipation is a function of the maximum junction temperature T (MAX), the junction-to- J Junction Temperature .............................. 150C ambient thermal resistance , and the ambient temperature JA Lead Temperature ................................... 260C T . The maximum allowable continuous power dissipation at A (2) any ambient temperature is calculated by P (MAX) = (T D J Continuous Power Dissipation (T = +25C) A (MAX)-T )/ . Exceeding the maximum allowable power A JA ... ................................................. 1.9W dissipation will cause excessive die temperature, and the regulator will go into thermal shutdown. Internal thermal Storage Temperature ............... -65C to +150 C shutdown circuitry protects the device from permanent (3) damage. Recommended Operating Conditions 3) The device is not guaranteed to function outside of its operating conditions. Supply Voltage V ............................ 2.5V to 6V IN 4) Measured on JESD51-7, 4-layer PCB. Output Voltage V .................. 12% x V to V OUT IN IN Operating Junction Temp. (T ). -40C to +125C J MPM3810 Rev. 1.1 www.MonolithicPower.com 2 12/8/2014 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. 2014 MPS. All Rights Reserved.