MPM3805GQB-Z

MPM3805 6V Input, 0.6A Module Synchronous Step-Down Converter with Integrated Inductor The Future of Analog IC Technology DESCRIPTION FEATURES The MPM3805 is a step-down module converter Wide 2.5V to 6V Operating Input Range with built-in power MOSFETs and inductor. The Fixed and Adjustable Output from 0.6V modules integrated inductor simplifies the power QFN-12 (2.5mmx3.0mmx0.9mm) Package system design and provides easy, efficient use. Total Solution Size 6mm x 3.8mm The DC-DC module comes in a small surface- Up to 0.6A Output Current mount QFN-12 (2.5mmx3.0mmx0.9mm) package 100% Duty Cycle in Dropout and achieves 0.6A continuous output current Ultra Low IQ: 17A from a 2.5V to 6V input voltage with excellent EN and Power Good for Power Sequencing load and line regulation. The output voltage is Cycle-by-Cycle Over-Current Protection regulated as low as 0.6V. For adjustable output, Short-Circuit Protection with Hiccup Mode only FB resistors and input and output capacitors Adjustable Output Only Needs 4 External are needed to complete the design. Components: 2 Ceramic Capacitors and FB The Constant-on-time control (COT) scheme Divider Resistors provides fast transient response and eases loop Fixed Output only Needs Input and Output stabilization. Fault condition protection includes Capacitors cycle-by-cycle current limiting and thermal APPLICATIONS shutdown (TSD). Low Voltage I/O System Power The MPM3805 is ideal for a wide range of LDO Replacement applications including high performance DSPs, Power for Portable Products FPGAs, PDAs, portable instruments and storage. Storage (SSD/HDD) Space-Limited Applications All MPS parts are lead-free and adhere to the RoHS directive. For MPS green status, please visit MPS website under Products, Quality Assurance page. MPS and The Future of Analog IC Technology are Registered Trademarks of Monolithic Power Systems, Inc. TYPICAL APPLICATION (Fixed Output) MPM3805 Rev.1.11 www.MonolithicPower.com 1 3/23/2015 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. 2015 MPS. All Rights Reserved. MPM3805 6V, 0.6A SIMPLE MODULE WITH INTEGRATED INDUCTOR ORDERING INFORMATION Part Number Package Top Marking Vo Range QFN-12 MPM3805GQB* AGR Adjustable (2.5mmX3.0mmX0.9mm) QFN-12 MPM3805GQB-12 AHE Fixed 1.2V (2.5mmX3.0mmX0.9mm) QFN-12 MPM3805GQB-18 AHD Fixed 1.8V (2.5mmX3.0mmX0.9mm) QFN-12 MPM3805GQB-25 AJK Fixed 2.5V (2.5mmX3.0mmX0.9mm) QFN-12 MPM3805GQB-33 AJJ Fixed 3.3V (2.5mmX3.0mmX0.9mm) * For Tape & Reel, add suffix Z (e.g. MPM3805GQBZ) PACKAGE REFERENCE MPM3805GQB-12 MPM3805GQB-18 MPM3805GQB MPM3805GQB-25 MPM3805GQB-33 QFN-12 (2.5mmX3.0mmX0.9mm) (1) (4) ABSOLUTE MAXIMUM RATINGS Thermal Resistance JA JC Supply Voltage V ...................................... 6.5V QFN-12 (2.5mmX3.0mm)65 13 C/W IN V .................................................................... SW Notes: -0.3V (-5V for <10ns) to 6.5V (7V for <10ns) 1) Exceeding these ratings may damage the device. All Other Pins ............................... -0.3V to 6.5 V 2) The maximum allowable power dissipation is a function of the maximum junction temperature T (MAX), the junction-to- J Junction Temperature .............................. 150C ambient thermal resistance , and the ambient temperature JA Lead Temperature ................................... 260C T . The maximum allowable continuous power dissipation at A (2) any ambient temperature is calculated by PD (MAX) = (TJ Continuous Power Dissipation (T = +25C) A (MAX)-T )/ . Exceeding the maximum allowable power A JA .................................................. 1.9W dissipation will cause excessive die temperature, and the regulator will go into thermal shutdown. Internal thermal Storage Temperature ............... -65C to +150 C shutdown circuitry protects the device from permanent (3) damage. Recommended Operating Conditions 3) The device is not guaranteed to function outside of its operating conditions. Supply Voltage V ............................ 2.5V to 6V IN 4) Measured on JESD51-7, 4-layer PCB. Output Voltage V .................. 12% x V to V OUT IN IN Operating Junction Temp. (T ). -40C to +125C J MPM3805 Rev.1.11 www.MonolithicPower.com 2 3/23/2015 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. 2015 MPS. All Rights Reserved.