TPA10 TekProbe Probe Adapter Key Features Allows TekProbe interface level II probes to work with any The TPA10 Tektronix TekProbe Probe Adapter permits connection ProBus-equipped Teledyne LeCroy of select Tektronix TekProbe interface level II probes to any oscilloscope ProBus-equipped Teledyne LeCroy oscilloscope. The TPA10 Automatic probe detection automatically detects which Tektronix probe is attached and supplies all necessary power and offset control to the probe, and communicates Provides all necessary power and the probe signal to the Teledyne LeCroy oscilloscope. offset control to the attached probe Supports probes up to 4 GHz Leverage Existing Probes Wide Variety of Supported Probes Investing in new probes can be very Easy firmware updates The TPA10 ProBus Probe Adapter expensive. With the TPA10, existing Wide variety of probes supports many popular probes up to TekProbe probes can be used on supported including: 4 GHz including: preamplifiers, current Teledyne LeCroy oscilloscopes, Preamplifiers probes, single-ended active probes and allowing for easy and affordable Current Probes differential active probes. access to the latest in oscilloscope Single-Ended Active Probes technology. Differential Active Probes Easy Firmware Updates The firmware for the TPA10 is Automatic Probe Detection included in the oscilloscope software. Simply plug the TPA10 into any If an updated firmware version for ProBus-equipped Teledyne LeCroy the TPA10 is available, an Update oscilloscope, attach a supported Firmware button will automatically TekProbe interface level II probe,and appear on the dialog making the oscilloscope will automatically updates simple. detect which probe is attached.SPECIFICATIONS & ORDERING INFORMATION Specifications Ordering Information Electrical Characteristics Product Description Product Code Bandwidth 4 GHz (adapter only) TekProbe to ProBus Probe Adapter TPA10 Power Supplies +15V, -15V, +5V, -5V (each 2%) Set of 4 TPA10 TekProbe to ProBus Probe TPA10-QUADPAK Offset Voltage 1V (1%) Adapters. Includes soft carrying case. Max. Input Voltage 47 V , 33 V pk rms Environmental Supported Probes Operating Temperature Range 0 to 50 C The following TekProbe devices are supported for use Non-operating Temperature Range -40 to +70 C with TPA10: Humidity 5% to 95% RH (10 to 40 C) 5% to 75% (above 40 C) RH not controlled below 10 C Preamplifiers Operating Altitude 3000 meters maximum 1 MHz Differential Preamplifier ADA400A Current Probes Physical 50 MHz AC/DC Current Probe TCP202/TCP202A Dimensions (WxHxD) 39 mm x 31.1 mm x 88.6 mm (1.54 x 1.22 x 3.49) Weight Single-ended Active Probes 119 g (0.26 lb) 750 MHz Single-ended Active Probe P6205 The TPA10 requires the Teledyne LeCroy oscilloscope to be running firmware 1 GHz Single-ended Active Probe P6243 version 7.8.0.0 or greater. 1.5 GHz Single-ended Active Probe P6245 4 GHz Single-ended Active Probe P6241 4 GHz Single-ended Active Probe P6249 Differential Active Probes 100 MHz Differential Probe P5205/P5205A 50 MHz Differential Probe P5210/P5210A 400 MHz Differential Probe P6246 1 GHz Differential Probe P6247 1.5 GHz Differential Probe P6248 500 MHz Differential Probe P6250 1 GHz Differential Probe P6251 Customer Service Teledyne LeCroy oscilloscopes and probes are designed, built, and tested to ensure high reliability. In the unlikely event you experience difficulties, our digital oscilloscopes are fully warranted for three years and our probes are warranted for one year. This warranty includes: No charge for return shipping Long-term 7-year support Upgrade to latest software at no charge 1-800-5-LeCroy Local sales offices are located throughout the world. teledynelecroy.com Visit our website to nd fi the most convenient location. tpa10-ds-08jul15 2015 Teledyne LeCroy, Inc. All rights reserved. Specifications, prices, availability, and delivery subject to change without notice. Product or brand names are trademarks or requested trademarks of their respective holders.