Product Information

SEM1750

SEM1750 electronic component of Status

Datasheet
SGNL COND, SPLITTER/ISOLATOR, RACK MOUNT

Manufacturer: Status
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges



Price (USD)

1: USD 354.5012 ea
Line Total: USD 354.5

0 - Global Stock
MOQ: 1  Multiples: 1
Pack Size: 1
Availability Price Quantity
0 - WHS 1


Ships to you between Fri. 24 May to Thu. 30 May

MOQ : 1
Multiples : 1

Stock Image

SEM1750
Status

1 : USD 354.5012

     
Manufacturer
Product Category
Brand
Signal Conditioner Input
Signal Conditioner Output
No. Of Output Channels
Supply Voltage
Signal Conditioner Mounting
Isolation Input
Svhc
Supply Voltage Ac Max
Supply Voltage Ac Min
Supply Voltage Dc Max
Supply Voltage Dc Min
LoadingGif

Notes:- Show Stocked Products With Similar Attributes.
Image Description
SEM213TC electronic component of Status SEM213TC

TEMPRATURE TX, DIN MOUNT
Stock : 0

SEM203/TC electronic component of Status SEM203/TC

TEMP.TRANSMITTER, T/C, PUSH BUTTON PROG
Stock : 0

SEM203/P electronic component of Status SEM203/P

TEMP. TRANSMITTER, PUSH BUTTON PROG
Stock : 0

SEM206P electronic component of Status SEM206P

Converter: temperature; 10÷30VDC; Kind of outputs:4÷20mA
Stock : 39

SEM206TC electronic component of Status SEM206TC

Converter: temperature; 12÷30VDC; Kind of outputs:4÷20mA
Stock : 12

SEM206/P electronic component of Status SEM206/P

TEMPERATURE TRANSMITTER, PT100, PANEL
Stock : 0

SEM206/TC electronic component of Status SEM206/TC

TEMP TRANSMITTER, THERMOCOUPLE, PANEL
Stock : 0

SEM310 electronic component of Status SEM310

HART TEMP TRANSMITTER, PANEL
Stock : 0

SEM315 electronic component of Status SEM315

HART TEMP TRANSMITTER, DIN RAIL
Stock : 0

USB-CONFIG-MKII electronic component of Status USB-CONFIG-MKII

Communication cable; Works with: SEM206P, SEM206TC
Stock : 1

Image Description
SEM1700 electronic component of Status SEM1700

SIGNAL CONDITIONER, UNIVERSAL
Stock : 0

SEM1636 electronic component of Status SEM1636

TRIP AMPLIFIER, DUAL, 4-20MA
Stock : 0

SEM1600T electronic component of Status SEM1600T

SGNL COND, RTD/RESISTANCE, DINRAIL
Stock : 0

SEM1600F electronic component of Status SEM1600F

SGNL COND, PULSE/FREQ, DINRAIL
Stock : 0

SEM1100-S1 electronic component of Status SEM1100-S1

CONVERTER, MAINS POWERED
Stock : 0

SEM104TC electronic component of Status SEM104TC

TEMPERATURE TRANSMITTER
Stock : 0

2906243 electronic component of Phoenix Contact 2906243

Terminal Block Interface Modules MACX MCR-VDC-PT
Stock : 10000

2906244 electronic component of Phoenix Contact 2906244

Terminal Block Interface Modules MACX MCR-VAC-PT
Stock : 7

XW2B-20G4 electronic component of Omron XW2B-20G4

Terminal Block Interface Modules M2.5 Screw Terminal 20 Pts.
Stock : 2

XW2B-34G4 electronic component of Omron XW2B-34G4

Terminal Block Interface Modules M2.5 Screw Term nal34 Pts.
Stock : 0

DUAL CHANNEL PROCESS CONDITIONER/ISOLATOR/SPLITTER SEM1750 50 Vdc or 50 mA FULL RANGE INPUTS WITH SENSOR SUPPLY VOLTAGE OR CURRENT ACTIVE / PASSIVE OUTPUTS DIRECT USB CONFIGURATION OFFERS SYSTEM DIAGNOSTIC TOOLS DUAL CHANNEL WITH 5 PORT ISOLATION (3.75 KV) WIDE RANGING AC/DC POWER SUPPLY USER SELECTABLE MATHS FUNCTIONS ON EACH OUTPUT CHANNEL USER LINERISATION (PROFILE) FUNCTION CONFIGURABLE AS AN ACTIVE SIGNAL SPLITTER INTRODUCTION The SEM1750 is a cost effective dual channel signal conditioner that accepts a bipolar voltage or current signal and isolates to provide ranged industrial process output signals such as (0 to 20) mA, (4 to 20) mA, (0 to 10) V, (1 to 5) V DC. The SEM1750 is configured using our easy to use configuration software USB Speed Link. USB speed link offers the user two levels of configuration, a basic current/voltage signal converter were the device can be set as dual channel or signal splitter or for more advanced applications a configuration menu offering a wide range of user set functions, including process scaling and profiling, maths functions, signal damping, sensor linearisation and signal preset for diagnostics purposes. SEM1750 POWER CONNECTIONS + (20 to 240) Vdc or POWER SUPPLY (20 to 240) Vac - INPUT CONNECTIONS OUTPUT CONNECTIONS + + + Tx V Int Powered mA - - - CH2 CH2 + INPUT OUTPUT + - Vs V + mA Ext Powered mA - - CONTROLLER Additional Data :- Tag number, Process Units, Process Data + + + Tx V Int Powered mA - - - CH1 CH1 OUTPUT + INPUT CH2 + - Vs V + CH1 mA - Ext Powered mA - USB DUAL CHANNEL PROCESS CONDITIONER/ISOLATOR/SPLITTER OUTPUT (Channels 1 & 2) (Continued) PC CONFIGRATION Current Range EQUIPMENT Working Range (0 to 20) mA User Range any range within full range COMPUTER Running Windows XP or later Max Range 23.1 mA (typical) with USB port Loop Voltage effect 0.2 uA / V (Sink Mode) USB CABLE A to Mini B Thermal drift 1 uA / C Current sink Supply voltage (10 to 28) V dc METHOD Current source Max Load 700 Load PC with USB SpeedLink software. Then install drivers. Accuracy (mA Out / 2000) or 5 A Connect SEM1750 USB port to PC USB port using cable. whichever is the greater Run software, set configuration required and save to device. Voltage Ranges Working Range (0 to 10) V SPECIFICATIONS 20 C User Range any range within full range Max Range 10.1 V (typical) INPUTS (Channels 1 & 2) Voltage Load Min 1 K (compensation provided) SAMPLE RATE Output Connection Screw Terminal User Set 420 mS (18 Bits full range) Accuracy 5 mV 140 mS (16 Bits full range) Thermal Drift 1 mV / C 70 mS (14 Bits full range) ISOLATION BS EN 61010-1:2010 CURRENT Supply to Input / Output Full Range 50 mA Working Voltage 253 V ac User Range any range within full range Isolation test Voltage 4000 V ac Impedance 10 Input output ports Accuracy Range (-22 to 22) mA 5 A Max Voltage (fault) 250 V ac Range (-50 to 50) mA 10 A Isolation test voltage 3750 V dc Stability 0.02 % (Full Scale) / C (Note USB terminals and CH1 output share the same Transmitter supply 22 V dc 25 mA Ground) VOLTAGE GENERAL SPECIFICATION Range 50 V dc Update time 720, 140, 70 mS User Range any range within full range Start up time 4 seconds Impedance 1 M Accuracy Range (-22 to 22) V 5 mV SUPPLY Range (-50 to 50) V 10 mV Range (20 to 240) V dc Stability 0.02 % (Full Scale) / C (20 to 240) V ac (50 to 60) Hz Power 3 W full output DAMPING current Type Independent rise and fall Protection Internal resettable fuse (0.5 A) delays (0 to 3600) seconds for Over Voltage protection. 1 V or 1 mA change. CONFIGURATION The following applies to both channels independently. PRESET Type User software preset Input Signal Scan Type 420, 140, 70 mS PROFILE (USER LINEARISATION) User Linearisation 22 segment Type 50 mA or 50 V Preset Isolates input signal and allows Input to process. user to enter input signal value. Damping Independent rise/fall delays for OUTPUT (Channels 1 & 2) Each channel. User Linearisation Segment (2 to 22) Output channels can be independently set to monitor one of Floating point numbers. the following (Ch1 & Ch2) input Functions. Input range to process range. Ch1 Ch2 Process Signal Process Units (4 characters) (Ch1 + Ch2) (Ch1 Ch2) Tag Number 20 characters Absolute (Ch1 Ch2) Highest Channel (CH1 or CH2) Output Signal Source Selects output channel source Lowest Channel (CH1 or CH2) (CH1 * CH2) Process out signal (CH1 / CH2) Process Out Low Any point within indicated (CH1 2) process range. (CH2 2) Process Out High Any point within indicated Average (CH1 CH2) process range. Fixed signal (For Diagnostics) Output Types Current (sink, source), Voltage Output Signal Type (0 to 20) mA, (0 to 10) V Low Signal Out Any point within type range High Signal Out Any point within type range

Tariff Desc

8536.69.10 62 Plugs and sockets for co-axial cables or printed circuits Free

8536.69.90 CONNECTORS, ELECTRICAL, being ANY of the following:
(a) plugs;
(b) sockets;
(c) adaptors
TC 1225594

8536.69.90 PLUG AND SOCKET COMBINATIONS, being ANY of the following:
(a) 2, 3, 4, 6, 9, 12 OR 15 way, rated to 300 V, maximum current of 15 amps;
(b) 2, 3 OR 12 way, single in line pin header;
(c) 1.3mm plug to 2.1mm socket;
(d) 2.5mm plug to 3.5mm socket
TC 9900931

8536.69.90 SOCKETS, being ANY of the following:
(a) single pin, NOT exceeding 3.5 mm;
(b) micro, single pin, 2 mm;
(c) DC power connector, 2.1 mm OR 2.5 mm;
(d) 9 pin OR 15 pin, sub D;
(e) 2, 4 OR 8 pole microphone connector;
(f) 2, 3, 5, 6, 7, 8 OR 13 pin DIN;
(g) 16, 20, 26, 34, 40 OR 50 way dual in line crimp-on
TC 9900883

8536.69 JACKS, phono, RCA Type
TC 8438480

8536.69.90 CONNECTORS, electrical, incorporating twist locking mechanism
TC 9703905

8536.70.90 CONNECTORS, OPTICAL Op. 12.06.2007 FIBRE
TC 0708845

8536.69 PLUGS, modular, telephone, to suit RJ 11 sockets and complying with US Standard FCC 68
TC 9203687

8536.90.90 LUGS, being solderable, copper connectors
TC 0613954

8535.90.00 CRIMPING TERMINALS, having bell-mouth OR flared cable entry
TC 9504891

8536.90 HOLDERS, dry cell
TC 8438464

8536.69.90 TC 1440896 POWER POINTS, plastic AND/OR metal, single OR multiple power outlet, with OR without EITHER of the following:
(a) LED (light-emitting diode) night light;
(b) single OR multiple power switches

8536.69 PLUGS/SOCKETS, adaptor being EITHER of the following:
(a) providing for plug or socket configurations used in other countries to connect to Australian standard plugs or sockets;
(b) providing for plug or socket configurations of Australian standard type to connect to plugs or sockets used in other countries
TC 8807068

Looking for help? Visit our FAQ's Section to answer to all your questions

 

X-ON Worldwide Electronics

Welcome To X-ON ELECTRONICS
For over three decades, we have been advocating and shaping the electronic components industry. Our management complements our worldwide business scope and focus. We are committed to innovation, backed by a strong business foundation. If you need a trustworthy supplier of electronic components for your business – look no further.
 

Copyright ©2024  X-ON Electronic Services. All rights reserved.
Please ensure you have read and understood our Terms & Conditions before purchasing.
All prices exclude GST.

Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted