Product Information

SEM203/P

SEM203/P electronic component of Status

Datasheet
TEMP. TRANSMITTER, PUSH BUTTON PROG

Manufacturer: Status
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges



Price (USD)

1: USD 102.7659 ea
Line Total: USD 102.77

0 - Global Stock
MOQ: 1  Multiples: 1
Pack Size: 1
Availability Price Quantity
0 - WHS 1


Ships to you between Wed. 22 May to Tue. 28 May

MOQ : 1
Multiples : 1

Stock Image

SEM203/P
Status

1 : USD 102.7659

     
Manufacturer
Product Category
Type
Signal Conditioner Input
Signal Conditioner Output
No Of Output Channels
Accuracy
Output Accuracy
Supply Voltage
No Of Channels
Signal Conditioner Mounting
Isolation Input
Svhc
Approval Bodies
External Diameter
Height
Length
No Of Inputs
No Of Outputs
Operating Temperature Max
Operating Temperature Min
Output Current Max
Output Current Min
Output Type
Supply Voltage Dc Max
Supply Voltage Dc Min
LoadingGif

Notes:- Show Stocked Products With Similar Attributes.
Image Description
SEM213TC electronic component of Status SEM213TC

TEMPRATURE TX, DIN MOUNT
Stock : 0

SEM203/TC electronic component of Status SEM203/TC

TEMP.TRANSMITTER, T/C, PUSH BUTTON PROG
Stock : 0

SEM206P electronic component of Status SEM206P

Converter: temperature; 10÷30VDC; Kind of outputs:4÷20mA
Stock : 39

SEM206TC electronic component of Status SEM206TC

Converter: temperature; 12÷30VDC; Kind of outputs:4÷20mA
Stock : 12

SEM206/P electronic component of Status SEM206/P

TEMPERATURE TRANSMITTER, PT100, PANEL
Stock : 0

SEM206/TC electronic component of Status SEM206/TC

TEMP TRANSMITTER, THERMOCOUPLE, PANEL
Stock : 0

SEM310 electronic component of Status SEM310

HART TEMP TRANSMITTER, PANEL
Stock : 0

SEM315 electronic component of Status SEM315

HART TEMP TRANSMITTER, DIN RAIL
Stock : 0

USB-CONFIG-MKII electronic component of Status USB-CONFIG-MKII

Communication cable; Works with: SEM206P, SEM206TC
Stock : 1

Image Description
SEM1720 electronic component of Status SEM1720

SGNL COND, RTD/THERMOCOUPLE, RACK MOUNT
Stock : 0

SEM1633 electronic component of Status SEM1633

SGNL COND, RTD/RESISTANCE, DINRAIL
Stock : 0

SEM1630 electronic component of Status SEM1630

TRIP AMP., UNIVERSAL
Stock : 0

SEM1600VI electronic component of Status SEM1600VI

SGNL COND, ISOLATOR, DINRAIL
Stock : 0

SEM104PT100 electronic component of Status SEM104PT100

TEMPERATURE TRANSMITTER
Stock : 0

2962777 electronic component of Phoenix Contact 2962777

Phoenix Contact Terminal Block Interface Modules UM 45-D 9 SUBS 9 POS MALE CON
Stock : 10000

2965198 electronic component of Phoenix Contact 2965198

Phoenix Contact Terminal Block Interface Modules UM 45 FLK 50 ZFKDSPLC
Stock : 10000

2968438 electronic component of Phoenix Contact 2968438

Terminal Block Interface Modules UM 45-FLKS40/ZFKDS
Stock : 10000

2970057 electronic component of Phoenix Contact 2970057

Phoenix Contact Terminal Block Interface Modules UMK- C64M-VS
Stock : 1

1395034-1 electronic component of TE Connectivity 1395034-1

Terminal Block Interface Modules 080-30-12SERIES 08IGUS SET
Stock : 0

TEMPERATURE TRANSMITTERS SEM203 P SUITABLE FOR PT100 SENSORS UNIQUE PUSH BUTTON CONFIGURATION WITHOUT PC PUSH BUTTON SENSOR MATCHING (4 to 20) mA OUTPUT HIGH STABILITY PROGRAMMABLE BURNOUT INTRODUCTION The SEM203/P is a low cost configurable in-head transmitter that accepts PT100 temperature sensors and converts sensor output over a configured range to a standard industrial (4 to 20) mA transmission signal. A simple push button operation allows the user to not only select the desire range and burnout direction but also perform user trim at both (4 and 20) mA points. The SEM203 in head transmitter incorporates the latest digital technology to ensure accurate drift free performance. If required the desired range can be specified at the time of order, removing the need for user configuration. If the range is not specified then the transmitter will be shipped with the default range of (0 to 100) C set. PUSH BUTTON CONFIGURATION SPECIFICATIONS 20 C EQUIPMENT INPUT Decade box or resistance of the equivalent value for the low and high temperature values for the desired range to be set. Sensor Type PT100 100R 0C 2 or 3 Wire Sensor Range (-195 to +845) C (18 to 390) METHOD Sensor Connection Screw terminal A single push button and LED indicator allows the user to Minimum span (*1) 25 C navigate a three menus, allowing configuration of the Linearisation BS EN 60751(IEC 751) standard / transmitter. The menus are as follow:- JISC 1604 Measurement Accuracy (*2) 0.2 C 0.05% of Reading Menu 1 Configure range. Thermal Drift 0.02 C / C Excitation current <200 uA Menu 2 Configure burnout direction. Lead Resistance effect 0.002 C / Ohm Maximum lead Resistance 20 Ohms per leg Menu 3 Trim output current either 4 mA or 20 mA. OUTPUT Output Type 2 wire (4 to 20) mA current loop Output range (4.0 to 20.0) mA Output Connection Screw Terminal Maximum output 21.5mA (in high burnout condition) Minimum output <3.9 mA (in low burnout condition) Accuracy (mA output /2000) or 5 uA (Which ever is the greater) Loop Voltage effect 0.2 uA / V Thermal drift 2 uA / C Maximum output load (Vsupply-10)/21 K Ohms (Example: 700 Ohms 24V) GENERAL SPECIFICATION Update time 500 ms Response Time 1 second Start up time 4 seconds ( I out < 4 mA during start up) Warm-up time 1 minutes to full accuracy Power Supply (10 to 30) Volts dc TEMPERATURE TRANSMITTERS ENVIRONMENTAL ELECTRICAL Ambient operating range (-40 to +85) C Full Accuracy only between (-30 to +75) C Ambient storage temperature (-50 to +90) C Ambient humidity range (10 to 90) % RH non condensing PHYSICAL Dimensions 43 mm diameter 21 mm height Weight 31 g (encapsulated) APPROVALS EMC - BS EN 61326 Electrical equipment for measurement control and laboratory use. ANNEX A Immunity test requirements for equipment intended for use in industrial locations ANNEX F Test configurations, operational conditions and performance criteria for transducers with integrated or remote signal conditioning. IEC 61000-4-2 Electrostatic discharge IEC 61000-4-3 EM Field IEC 61000-4-4 Transient Burst (output) IEC 61000-4-5 Surge (output) Note - Sensor input wires to be less than 3 metres to comply. Note *1 Any span may be selected, full accuracy is only guaranteed for spans greater than the minimum recommended Note *2 Basic measurement accuracy includes the effects of calibration, linearisation and repeatability MECHANICAL ORDER CODE SERIES SEM203 Pt100 P 1 CONFIG203* Fixing holes 2 x 5.5 mm Centre hole 4.0 mm *NOTES: 1) For special configuration, please contact the sales office. Upscale burnout is standard, for downscale please contact the sales office Status Instruments Ltd Tel: +44 (0)1684 296818 Status Business Park Fax: +44 (0)1684 293746 Gannaway Lane, Tewkesbury Email: sales status.co.uk Gloucestershire, UK Website: www.status.co.uk GL20 8FD D2440-01-05 CN5159 SEM203P DATA SHEET

Tariff Desc

8536.69.10 62 Plugs and sockets for co-axial cables or printed circuits Free

8536.69.90 CONNECTORS, ELECTRICAL, being ANY of the following:
(a) plugs;
(b) sockets;
(c) adaptors
TC 1225594

8536.69.90 PLUG AND SOCKET COMBINATIONS, being ANY of the following:
(a) 2, 3, 4, 6, 9, 12 OR 15 way, rated to 300 V, maximum current of 15 amps;
(b) 2, 3 OR 12 way, single in line pin header;
(c) 1.3mm plug to 2.1mm socket;
(d) 2.5mm plug to 3.5mm socket
TC 9900931

8536.69.90 SOCKETS, being ANY of the following:
(a) single pin, NOT exceeding 3.5 mm;
(b) micro, single pin, 2 mm;
(c) DC power connector, 2.1 mm OR 2.5 mm;
(d) 9 pin OR 15 pin, sub D;
(e) 2, 4 OR 8 pole microphone connector;
(f) 2, 3, 5, 6, 7, 8 OR 13 pin DIN;
(g) 16, 20, 26, 34, 40 OR 50 way dual in line crimp-on
TC 9900883

8536.69 JACKS, phono, RCA Type
TC 8438480

8536.69.90 CONNECTORS, electrical, incorporating twist locking mechanism
TC 9703905

8536.70.90 CONNECTORS, OPTICAL Op. 12.06.2007 FIBRE
TC 0708845

8536.69 PLUGS, modular, telephone, to suit RJ 11 sockets and complying with US Standard FCC 68
TC 9203687

8536.90.90 LUGS, being solderable, copper connectors
TC 0613954

8535.90.00 CRIMPING TERMINALS, having bell-mouth OR flared cable entry
TC 9504891

8536.90 HOLDERS, dry cell
TC 8438464

8536.69.90 TC 1440896 POWER POINTS, plastic AND/OR metal, single OR multiple power outlet, with OR without EITHER of the following:
(a) LED (light-emitting diode) night light;
(b) single OR multiple power switches

8536.69 PLUGS/SOCKETS, adaptor being EITHER of the following:
(a) providing for plug or socket configurations used in other countries to connect to Australian standard plugs or sockets;
(b) providing for plug or socket configurations of Australian standard type to connect to plugs or sockets used in other countries
TC 8807068

Looking for help? Visit our FAQ's Section to answer to all your questions

 

X-ON Worldwide Electronics

Welcome To X-ON ELECTRONICS
For over three decades, we have been advocating and shaping the electronic components industry. Our management complements our worldwide business scope and focus. We are committed to innovation, backed by a strong business foundation. If you need a trustworthy supplier of electronic components for your business – look no further.
 

Copyright ©2024  X-ON Electronic Services. All rights reserved.
Please ensure you have read and understood our Terms & Conditions before purchasing.
All prices exclude GST.

Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted