MP3217DJ-LF-Z

MP3217 36V, 670kHz Step-up Converter with a 0.5A Switch The Future of Analog IC Technology DESCRIPTION FEATURES The MP3217 is a monolithic step up converter Internal 0.6 Power MOSFET integrating a 0.5A, 0.6 internal switch. The Up to 36V Output Voltage MP3217 uses current mode, fixed frequency 670kHz Fixed Switching Frequency architecture to regulate the output voltage, 42V Over Voltage Shutdown providing fast transient response and cycle by Cycle-by-Cycle Over Current Protection cycle current limit. UVLO, Thermal Shutdown Available in TSOT23-6 Packages The MP3217 includes under-voltage lockout, over voltage protection and thermal overload APPLICATIONS protection preventing damage in the event of an output overload. APD Bias Generation Portable Applications The MP3217 is available in small 6-pin TSOT23 Handheld Computers and PDAs package. The device is ROHS compliance. Digital Still Cameras Monolithic Power Systems, MPS, and The Future of Analog IC Technology are Registered Trademarks of Monolithic Power Systems, Inc. TYPICAL APPLICATION Efficiency vs. D1 Output Current 90 B0540 V =5V V =33V IN OUT 80 70 SW IN MP3217 60 EN FB ENABLE 50 GND PGND 40 0 2 4 6 8 101214161820 OUTPUT CURRENT (mA) MP3217 Rev. 1.0 www.MonolithicPower.com 1 7/15/2014 MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited. 2014 MPS. All Rights Reserved. EFFICIENCY (%)MP3217 36V, 670kHz STEP-UP CONVERTER WITH A 0.5A SWITCH ORDERING INFORMATION Part Number* Package Top Marking Free Air Temperature (T ) A MP3217DJ TSOT23-6 7H -40 C to +85 C * For Tape & Reel, add suffix Z (e.g. MP3217DJZ) For RoHS Compliant Packaging, add suffix LF (e.g. MP3217DJLFZ) PACKAGE REFERENCE TOP VIEW PGND 1 6 SW GND 2 5 IN FB 3 4 EN (1) (4) ABSOLUTE MAXIMUM RATINGS Thermal Resistance JA J C SW Pin..........................................-0.5V to +44V TSOT23-6 ..............................220 .... 110.. C/W All Other Pins...............................-0.3V to +6.5V (2) Notes: Continuous Power Dissipation (T = +25C) A 1) Exceeding these ratings may damage the device......................................................... 0.56W 2) The maximum allowable power dissipation is a function of the maximum junction temperature T(MAX), the junction-to- J Junction Temperature...............................150C ambient thermal resistance , and the ambient temperature JA Lead Temperature ....................................260C T . The maximum allowable continuous power dissipation at A any ambient temperature is calculated by P (MAX)=(T (MAX)- D J Storage Temperature............... -55C to +150 C T )/ . Exceeding the maximum allowable power dissipation A JA (3) will cause excessive die temperature, and the regulator will go Recommended Operating Conditions into thermal shutdown. Internal thermal shutdown circuitry IN Supply Voltage ..............................2.5V to 6V protects the device from permanent damage. 3) The device is not guaranteed to function outside of its SW Pin................................................V to 36V IN operating conditions. Operating Junct. Temp (T )...... -40 C to +125 C J 4) Measured on JESD51-7, 4-layer PCB. MP3217 Rev. 1.0 www.MonolithicPower.com 2 7/15/2014 MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited. 2014 MPS. All Rights Reserved.