VCUT05D1-SD0-G4-08

VCUT05D1-SD0 www.vishay.com Vishay Semiconductors Bidirectional Symmetrical (BiSy) Single Line ESD-Protection Diode in Silicon Package FEATURES Ultra compact CLP0603 package Low package height < 0.3 mm 0.27 1-line ESD-protection Working range 5.5 V Low leakage current < 0.1 A Low load capacitance C < 14 pF 0.6 D 22543 0.3 22544 ESD-protection acc. IEC 61000-4-2 30 kV contact discharge 30 kV air discharge Lead plating: Au (e4) MARKING (example only) Lead material: TiNiAg e4 - precious metal (e.g. Ag, Au, NiPd, NiPdAu) (no Sn) 1 XY Material categorization: For definitions of compliance 22454 please see www.vishay.com/doc 99912 1 = Year code Open circle = Month code and pin 1 XY = Type code ORDERING INFORMATION TAPED UNITS PER REEL DEVICE NAME ORDERING CODE MINIMUM ORDER QUANTITY (8 mm TAPE ON 7 REEL) VCUT05D1-SD0 VCUT05D1-SD0-G4-08 15 000 15 000 PACKAGE DATA PACKAGE TYPE MOISTURE DEVICE NAME WEIGHT FLAMMABILITY RATING SOLDERING CONDITIONS NAME CODE SENSITIVITY LEVEL 260 C/10 s at terminals MSL level 1 VCUT05D1-SD0 CLP0603 5D 0.12 mg UL 94 V-0 Reflow soldering (according J-STD-020) according JEDEC STD-020 ABSOLUTE MAXIMUM RATINGS VCUT05D1-SD0 PARAMETER TEST CONDITIONS SYMBOL VALUE UNIT Peak pulse current acc. IEC 61000-4-5, 8/20 s/single shot I 6A PPM Pin 1 to pin 2 Peak pulse power P 78 W PP acc. IEC 61000-4-5 t = 8/20 s single shot p Contact discharge acc. IEC61000-4-2 10 pulses 30 ESD immunity V kV ESD Air discharge acc. IEC61000-4-2 10 pulses 30 Operating temperature Junction temperature T -55 to +150 C J Storage temperature T -55 to +150 C stg Rev. 1.3, 19-Nov-13 Document Number: 83443 1 For technical questions, contact: ESDprotection vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000VCUT05D1-SD0 www.vishay.com Vishay Semiconductors CUT THE SPIKES WITH VCUT05D1-SD0 The VCUT05D1-SD0 is a Bidirectional and Symmetrical (BiSy) ESD-protection device which clamps positive and negative overvoltage transients to ground. Connected between the signal or data line and the ground the VCUT05D1-SD0 offers a high isolation (low leakage current, low capacitance) within the specified working range. Due to the short leads and small package size of the tiny CLP0603 package the line inductance is very low, so that fast transients like and ESD-strike can be clamped with minimal over- or undershoots. ELECTRICAL CHARACTERISTICS VCUT05D1-SD0 (T = 25 C, unless otherwise specified) amb PARAMETER TEST CONDITIONS/REMARKS SYMBOL MIN. TYP. MAX. UNIT Protection paths Number of lines which can be protected N - - 1 lines channel Reverse stand-off voltage Max. reverse working voltage V -- 5.5 V RWM Reverse voltage at I = 0.1 A V 5.5 - - V R R Reverse current at V = 5.5 V I -- 0.1 A RWM R Reverse breakdown voltage at I = 1 mA V 6.5 8 9 V R BR at I = 1 A V -8.8 10 V PP C Reverse clamping voltage at I = I = 6 A V -11 13 V PP PPM C at V = 0 V f = 1 MHz C -13 14 pF R D Capacitance at V = 2.5 V f = 1 MHz C -11- pF R D Transmission Line Pulse (TLP) t = 100 ns p Clamping voltage V -9.8 - V C-TLP I = 8 A TLP Transmission Line Pulse (TLP) t = 100 ns p Clamping voltage V -11- V C-TLP I = 16 A TLP Dynamic resistance Transmission Line Pulse (TLP) t = 100 ns R -0.15 - p DYN TYPICAL CHARACTERISTICS (T = 25 C, unless otherwise specified) amb 120 % 100 % 8 s to 100 % Rise time = 0.7 ns to 1 ns 100 % 80 % 80 % 60 % 60 % 20 s to 50 % 53 % 40 % 40 % 27 % 20 % 20 % 0 % 0 % 010 20 30 40 - 10 0 10 20 30 40 50 60 70 80 90 100 20548 Time (s) Time (ns) 20557 Fig. 1 - ESD Discharge Current Wave Form Fig. 2 - 8/20 s Peak Pulse Current Wave Form acc. IEC 61000-4-2 (330 /150 pF) acc. IEC 61000-4-5 Rev. 1.3, 19-Nov-13 Document Number: 83443 2 For technical questions, contact: ESDprotection vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 Discharge Current I ESD I PPM