CSC05A0147K0GEK

CSC www.vishay.com Vishay Dale Thick Film Resistor Networks, Single-In-Line, Conformal Coated SIP FEATURES Isolated, bussed and dual terminator schematics available Body height: A profile = 0.195 (4.95 mm) and B profile = 0.295 (7.50 mm) standard custom C profile = 0.350 (8.89 mm) also available Available A profile standard in 4 thru 12 pins Thick film resistive elements Reduces total assembly costs Resistor elements protected by tough epoxy conformal coating Wide resistance range (10 to 2.2 M ) Available in bulk pack as standard optional tube pack is also available Meets EIA/ECA-CB23 rev. G whisker test requirements for class 1A products Material categorization: For definitions of compliance please see www.vishay.com/doc 99912 Note * This datasheet provides information about parts that are RoHS-compliant and/or parts that are non-RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information/tables in this datasheet for details. STANDARD ELECTRICAL SPECIFICATIONS TEMP. TEMPERATURE MAX. GLOBAL POWER RATING RESISTANCE COEFFICIENT (2) PACKAGE COEFFICIENT TOLERANCE WORKING (1) (1) MODEL/ ELEMENT RANGE TRACKING (3) HEIGHT (- 55 C to + 125 C) % VOLTAGE SCHEMATIC P W (- 55 C to + 125 C) 70 C ppm/C V DC ppm/C 10 to 50 250 A0.20 50.1 to 2.2M 100 CSCxxx01 1, 2, 5 50 100 10 to 50 250 B0.25 50.1 to 2.2M 100 10 to 50 250 A0.30 50.1 to 2.2M 100 CSCxxx03 1, 2, 5 50 100 10 to 50 250 B0.40 50.1 to 2.2M 100 10 to 50 250 A0.20 50.1 to 2.2M 100 CSCxxx05 1, 2, 5 150 100 10 to 50 250 B0.25 50.1 to 2.2M 100 Notes See derating curves for package power rating (1) For resistor power ratings at + 25 C see derating curves (2) 2 % standard, 1 % and 5 % available (3) Continuous working voltage shall be P x R or maximum working voltage, whichever is less Revision: 03-May-13 Document Number: 31509 1 For technical questions, contact: ff2aresistors vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000CSC www.vishay.com Vishay Dale GLOBAL PART NUMBER INFORMATION New Global Part Numbering: CSC08A03100RGEK (preferred part number format) C S C 0 8 A 0 3 1 0 0 R G E K GLOBAL PACKAGE RESISTANCE TOLERANCE PIN COUNT SCHEMATIC PACKAGING SPECIAL MODEL HEIGHT VALUE CODE CSC 04 to 12 pin A = A profile 01 = Bussed R = F = 1 % EK = Lead (Pb)-free, bulk Blank = Standard available B = B profile 03 = Isolated K = k G = 2 % PA = Tin/lead, bulk (dash number) 04 = 4 pin 00 = Special M = M J = 5 % (up to 3 digits) 08 = 8 pin 10R0 = 10 S = Special From 1 to 999 12 = 12 pin 680K = 680 k Z = 0 as applicable 1M00 = 1.0 M Jumper 0000 = 0 Jumper Historical Part Number example: CSC08A03101GEK (will continue to be accepted) CSC 08 A 03 101 G EK HISTORICAL PACKAGE RESISTANCE TOLERANCE PIN COUNT SCHEMATIC PACKAGING MODEL HEIGHT VALUE CODE New Global Part Numbering: CSC08A05131AGEK (preferred part number format) C S C 0 8 A 0 5 1 3 1 A G E K GLOBAL PACKAGE RESISTANCE TOLERANCE PIN COUNT SCHEMATIC PACKAGING SPECIAL MODEL HEIGHT VALUE CODE CSC 04 to 12 pin A = A profile 05 = Dual 3 digit F = 1 % EK = Lead (Pb)-free, bulk Blank = Standard available B = B profile terminator impedance G = 2 % PA = Tin/lead, bulk (Dash Number) 04 = 4 pin code, followed J = 5 % (Up to 3 digits) 08 = 8 pin by alpha From 1 to 999 12 = 12 pin modifier (see as applicable impedance table) Historical Part Number example: CSC08A05131AGEK (will continue to be accepted) CSC 08 A 05 221 331 G EK HISTORICAL PACKAGE RESISTANCE RESISTANCE TOLERANCE PIN COUNT SCHEMATIC PACKAGING MODEL HEIGHT VALUE 1 VALUE 2 CODE Note For additional information on packaging, refer to the Through-Hole Network Packaging document (www.vishay.com/doc 31542). TECHNICAL SPECIFICATIONS PARAMETER UNIT CSC SERIES Voltage coefficient of resistance V < 50 ppm typical eff Dielectric strength V 200 AC Isolation resistance (03 schematic) > 100M Operating temperature range C - 55 to + 125 DIMENSIONS in inches (millimeters) A 0.098 (2.49) Max. Max. C Max. 0.130 0.010 Pi n (3.30 0.254) 1 0.045 (1.14) 0.012 0.003 0.032 0.050 (1.27) Max. (0.305 0.076) (0.813) 0.018 0.003 (Leads are along (0.457 0.076) centerline of body) 0.100 0.010 (2.54 0.254) Non-Accumulative B Revision: 03-May-13 Document Number: 31509 2 For technical questions, contact: ff2aresistors vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000