OPB718Z

Photologic Reflective Object Sensor OPB715Z, OPB716Z, OPB717Z, OPB718Z Features: Focused for maximum sensitivity .5 (12.700 mm) sensing distance Product Photo Here Panel mount Choice of output configurations 18 (457.200 mm) minimum wire length Description: The OPB715Z series reflective assembly consists of a GaALAs LED and a Photologic sensor enclosed in an IR transmissive housing. The sensor is characterized to detect paper at 0.5 (12.7 mm). The sensor has a wide operating distance range and is capable of detecting reflective objects at other distances. The reflective distance depends on the reflectance materials. The sensors panel-mount plastic housing shields stray light and is terminated with 18 (457 mm) UL approved 26 AWG wire leads. The LED is current limited internally for design convenience. Its output can be specified as either TTL Totem-Pole or TLL Open-Collector. Inverted output options are available for either output configuration. Applications: Reflection Lead Part LED Peak Sensor Distance Length / Focused for maximum sensitivity Number Wavelength Photologic Inch (mm) Spacing 0.5 (12.700 mm) sensing distance OPB715Z Totem-Pole Panel mount OPB716Z Open-Collector 18 / 26 Choice of output configurations 890 nm 0.50 AWG Wire OPB717Z Inv-Totem-Pole 18 (457.200 mm) minimum wire length OPB718Z Inv-Open-Collector OPB715 Buffered Totem-Pole OPB716 Buffered Open Collector VCC V CC OUT AMP AMP OUT GND GND OPB717 Inverted Totem-Pole OPB718 Inverted Open-Collector V V CC CC OUT AMP AMP OUT MILLIMETERS DIMENSIONS ARE IN: GND GND INCHES Color-Pin Description Orange V CC White Output Violet Ground OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. RoHS OPTEK Technology Inc. 1645 Wallace Drive, Carrollton, Texas 75006 Issue A.2 1/07 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors optekinc.com www.optekinc.com Page 1 of 3 Photologic Reflective Object Sensor OPB715Z, OPB716Z, OPB717Z, OPB718Z Absolute Maximum Ratings (T =25C unless otherwise noted) A Storage & Operating Temperature Range -40 C to +85 C Supply Voltage, V (not to exceed 2 seconds) 10 V CC (1) Power Dissipation 300 mW Output Voltage (Open-Collector only) 35 V Electrical Characteristics (T = 25C unless otherwise noted) A SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS V Operating Supply Voltage 4.75 - 5.25 V - CC I Low-Level Supply Current: - - 30 mA V = 5.0 V, output open CCL CC I High-Level Supply Current - - 50 mA V = 5.0 V, output open CCH CC High-Level Output Current (3) I OPB716 - - 100 A V = 4.5 V, V = 5 V OH CC CH (4) - - 100 A = 4.5 V, V = 5 V OPB718 V CC CH Short Circuit Output Current I OPB715 - - 100 A V = 5.0 V, V = 5 V OS CC CH OPB717 - - 100 A Low-Level Output Voltage OPB715 - - 0.4 V (4) V = 5.0 V, I = 12.8 mA CC OL OPB716 - - 0.4 V V OL OPB717 - - 0.4 (3) V V = 5.0 V, I = 12.8 mA CC OL OPB718 - - 0.4 Notes: (1) Derate linearly at 5.0 mW / C above 25 C. (2) Terminating wire is 7 strand, 26 AWG, UL 1429. (3) Tested at d = 0.55 (12.7 mm) from a 90% diffuse, white test surface. Reference: Eastman Kodak Catalog E 152 7795. (4) No reflective surface. Typical - Trigger Points vs Displacement Typical - Trigger Points vs Displacement From Top & Bottom From Both Sides 0.15 0.50 0.13 Turn-ON 0.40 0.10 0.30 Turn-ON Turn-OFF 0.08 0.20 0.05 Turn-OFF 0.10 0.03 TOP 0.00 0.00 -0.03 -0.10 -0.05 Turn-OFF Turn-OFF Turn-ON -0.20 -0.08 -0.30 -0.10 -0.40 -0.13 Turn-ON -0.15 -0.50 0.00 0.10 0.20 0.30 0.40 0.50 0.60 0.70 0.00 0.10 0.20 0.30 0.40 0.50 0.60 0.70 Distance (inches) Distance (inches) OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.2 1/07 OPTEK Technology Inc. 1645 Wallace Drive, Carrollton, Texas 75006 Page 2 of 3 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors optekinc.com www.optekinc.com FRONT Distance (inches) FRONT Distance (inches)