TLP2704

TLP2704 Photocouplers GaAAs Infrared LED & Photo IC TLP2704TLP2704TLP2704TLP2704 1. 1. ApplicationsApplications 1. 1. ApplicationsApplications Intelligent Power Module Signal Isolation Factory Automation (FA) Transistor Inverters 2. 2. 2. 2. GeneralGeneralGeneralGeneral The TLP2704 consists of a GaAAs light-emitting diode optically coupled with an integrated high-gain, high- speed photodetector and is housed in the SO6L package. It supports operating temperatures of up to 125 . The SO6L package meets the reinforced insulation class requirements of international safety standards. The photodetector has an internal Faraday shield that provides a guaranteed common-mode transient immunity of 20 kV/s. The TLP2704 guarantees minimum and maximum of propagation delay time, pulse width distortion. Therefore it is suitable for isolation interface between IPM and control IC circuits in motor control application. 3. 3. FeaturesFeatures 3. 3. FeaturesFeatures (1) Inverter logic type (open collector output) (2) Package: SO6L (3) Operating temperature: -40 to 125 (4) Supply voltage: -0.5 to 30 V (5) Threshold input current: 5.0 mA (max) (6) Supply current: 1.3 mA (max) (7) Propagation delay time: t = 400 ns (max), t = 550 ns (max) pHL pLH (8) Pulse width distortion: 400 ns (max) (9) Common-mode transient immunity: 20 kV/s (min) (10) Isolation voltage: 5000 Vrms (min) (11) Safety standards UL-approved: UL1577, File No.E67349 cUL-approved: CSA Component Acceptance Service No.5A File No.E67349 (Note 1) VDE-approved: EN60747-5-5, EN60065 or EN60950-1, EN62368-1 (Pending) (Note 1)(Note 1)(Note 1) Option (D4) Note 1: When a VDE approved type is needed, please designate the Option (D4)Option (D4)Option (D4). Start of commercial production 2015-03 2015 Toshiba Corporation 2015-11-12 1 Rev.2.0TLP2704 4. 4. 4. 4. Packaging and Pin AssignmentPackaging and Pin AssignmentPackaging and Pin AssignmentPackaging and Pin Assignment 1: Anode 2: N.C. 3: Cathode 4: GND 5: V (Output) O 6: V CC 11-4N1A 5. 5. Internal CircuitInternal Circuit 5. 5. Internal CircuitInternal Circuit 6. 6. 6. 6. Principle of OperationPrinciple of OperationPrinciple of OperationPrinciple of Operation 6.1. 6.1. Truth TableTruth Table 6.1. 6.1. Truth TableTruth Table Input LED Output H ON L L OFF H 6.2. 6.2. 6.2. 6.2. Mechanical ParametersMechanical ParametersMechanical ParametersMechanical Parameters Characteristics Min Unit Creepage distances 8.0 mm Clearance distances 8.0 Internal isolation thickness 0.4 2015 Toshiba Corporation 2015-11-12 2 Rev.2.0