SPECIFICATION CONTROL DRAWING Product Revisions Component Dimensions Shall Accommodate Cable With Dimensions Part Name Ident. B C D E F H L 1.75 Code min min min max min max (L 0.07) ST63-1-55-GA-CL C ST631R 16.5 1.9 2.65 8.25 2.65 0.90 1.9 (0.650) (0.075) (0.105) (0.325) (0.105) (0.035) (0.075) ST63-2-55-GA-CL C ST632R 16.5 2.65 3.68 8.25 3.68 1.40 2.65 (0.650) (0.105) (0.145) (0.325) (0.145) (0.055) (0.105) ST63-3-55-GA-CL C ST633R 16.5 4.3 5.08 8.25 5.08 2.15 4.3 (0.650) (0.170) (0.200) (0.325) (0.200) (0.085) (0.170) ST63-4-55-GA-CL C ST634R 19.1 5.95 6.45 8.25 6.45 3.30 5.95 (0.750) (0.235) (0.255) (0.325) (0.255) (0.130) (0.235) ST63-5-55-GA-CL C ST635R 19.1 7.0 7.6 8.25 7.6 4.30 7.0 (0.750) (0.275) (0.300) (0.325) (0.300) (0.170) (0.275) MATERIAL 1. INSULATION SLEEVE: Heat-shrinkable, radiation cross-linked modified polyvinylidene fluoride. Transparent blue. 2. SOLDER PREFORM WITH FLUX: SOLDER: TYPE Sn63 per ANSI J-STD-006. FLUX: TYPE ROL1 per ANSI J-STD-004. 3. MELTABLE RINGS: Stabilized thermoplastic. Color: blue. 4. PRE-INSTALLED LEAD: RAYCHEM 55A0111 in accordance with MIL-W-22759/32. Stranded tin plated copper. Color: (see note). APPLICATION 1. These parts are designed to provide an environment protected shield termination on cables, rated for 125C minimum, meeting the dimensional criteria listed and having tin or silver plated shields. 2. Temperature range: -55C to +150C. 3. When installed in accordance with Raychem Process Standard RCPS-100-70 assemblies will meet performance requirements of Raychem Specification RT-1404. Complete part number is defined as shown: ST18-A 55 GA CL Size Lead type Lead AWG Lead color designation per MIL-STD-681. 1 to 5 M22759/32 20 22 Colors available: 24 26 20AWG-black, green, white For best results, prepare the cable as shown: 22AWG-black, green, white 24AWG-black, blue, white 26AWG-black, white All gauges: White with a single black stripe. *A trademark of Raychem Corporation. TITLE: Raychem Corporation THERMOFIT 300 Constitution Drive SOLDERSLEEVE* DEVICE DEVICES Menlo Park, CA 94025 TERMINATION WITH LEADS USA UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. DOCUMENT NO.: ST63-X-55-GA-CL INCHES DIMENSIONS ARE BETWEEN BRACKETS. TOLERANCES: ANGLES: N/A Raychem reserves the right to amend this DCR NUMBER: REPLACES: 0.00 N/A drawing at any time. Users should D981080 St6355 0.0 N/A ROUGHNESS IN evaluate the suitability of the product for 0 N/A MICRON their application. DRAWN BY: DATE: REV.: DOC ISSUE: SCALE: SIZE: SHEET: R. MAPALO 08/12/98 SEE TABLE 5 NONE A 1 of 1 If this document is printed it becomes uncontrolled. Check for the latest revision