SPECIFICATION CONTROL DRAWING Product Revision Component Dimensions Cable Dimensions Product Ident. L1.75 B C H D E F G Name Code min min min max max min max (L0.07) S02-07-R-XX * SIZE2R 16.5 2.65 3.68 8.25 2.65 3.68 1.40 0.72 (0.650) (0.105) (0.140) (0.325) (0.105) (0.140) (0.055) (0.030) S02-08-R-XX * SIZE3R 16.5 4.30 5.08 8.25 4.30 5.08 2.15 1.25 (0.650) (0.170) (0.200) (0.325) (0.170) (0.200) (0.085) (0.050) S02-10-R-XX * SIZE5R 19.1 7.00 7.60 8.25 7.00 7.60 4.30 2.50 (0.750) (0.275) (0.300) (0.325) (0.275) (0.300) (0.170) (0.100) * Consult Raychem for individual product revision. Contains more than 1 part name. MATERIALS 1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride. 2. SOLDER PREFORM WITH FLUX: SOLDER: TYPE Sn63 per ANSI J-STD-006. FLUX: TYPE ROL1 per ANSI-J-STD-004. THERMAL INDICATOR: Color change violet to colorless. 3. MELTABLE RINGS: Thermally stabilized thermoplastic. Color: blue. 4. PRE-INSTALLED LEAD: MIL-W-22759/32-22-XX*. (Raychem 55A0111-22-XX*) *XX: Part name and lead callout shall be replaced with lead color designation per MIL-STD-681. Colors available: solid and with single stripe. APPLICATION 1. These parts are designed to provide an environment protected shield termination on cables, rated for 105C minimum, meeting the dimensional criteria listed and having tin or silver plated shields and insulation compatible with the insert material. For compatible insulations, see SAE-AS83519/2 or consult Raychem. 2. When installed per Raychem process standard RCPS-100-70, assemblies will meet those requirements of Raychem Specification RT-1404 and SAE-AS83519/2. 3. For assembly information, refer to Raychem document RCPS-100-70. 4. Parts shall be marked with identification code per table. For best results,prepare the cable as shown: - Strip length of shield: 6.35 8.25 (.250 - .325) - Use methods (a) or (b) with cable rated for 125C and above. Use method (c) for cables rated for 105C and cable with spiral wrapped shields. a) Window Strip b) End Strip c) End Strip with Fold Back TITLE: THERMOFIT SOLDERSLEEVE SHIELD TERMINATION DEVICES ENVIRONMENT RESISTANT WITH LEAD 300 Constitution Drive Menlo Park, CA 94025, USA UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. DOCUMENT NO.: S02-07/-08/-10-R-XX INCHES DIMENSIONS ARE BETWEEN BRACKETS. TOLERANCES: ANGLES: N/A TE Connectivity reserves the right to amend DCR NUMBER: REPLACES: 0.00 N/A this drawing at any time. Users should D000419 N/A 0.0 N/A ROUGHNESS IN evaluate the suitability of the product for 0 N/A MICRON their application. DRAWN BY: DATE: PROD. REV. DOC ISSUE: SCALE: SIZE: SHEET: M. FORONDA 27-Sept-00 SEE TABLE 2 None A 1 of 1 Print Date: 12-May-11 If this document is printed it becomes uncontrolled. Check for the latest revision