CUSTOMER DRAWING
MATERIALS
1. INSULATION SLEEVE: Heat-shrinkable, transparent clear, radiation cross-linked modified polyolefin.
2. SOLDER PREFORM WITH FLUX:
SOLDER: TYPE Sn42Bi58 per ANSI-J-STD-006.
FLUX: TYPE ROM1 per ANSI-J-STD-004.
APPLICATION
1. These controlled soldering devices are designed for termination of a wire to the lead of electrical component or to the terminal of
a connector.
2. Temperature range: -55C to +125C. For installation procedure and application equipment, consult RPIP-824-00 or H54286.
For best results, prepare the wire as shown:
Tyco Electronics TITLE:
300 Constitution Dr
SOLDERSLEEVE ONE STEP WIRE TERMINATOR
Menlo Park, CA
94025, U.S.A.
LOW TEMPERATURE, LEAD FREE
Unless otherwise specified dimensions are in
Raychem
DOCUMENT NO.:
millimeters.
Devices
[Inches dimensions are shown in brackets] B-155-9101
TOLERANCES: ANGLES: N/A Tyco Electronics reserves the right to
0.00 N/A amend this drawing at any time. Users
REV: DATE:
0.0 N/A ROUGHNESS should evaluate the suitability of the
A 8-Jun-07
0 N/A IN MICRON product for their application.
DRAWN BY: CAGE CODE: REPLACES: ECO NUMBER: SCALE: SIZE: SHEET:
--- 07-013637
P.TALLY 06090 NTS A 1 of 1
2007 Tyco Electronics Corporation. All rights reserved.
If this document is printed it becomes uncontrolled. Check for the latest revision.