SPECIFICATION CONTROL DRAWING Product Revision Product Dimensions L MAX A min B min Product Name D-108-00 F 17.25 1.9 2.4 (0.680) (0.075) (0.095) D-108-01 F 17.25 2.8 3.15 (0.680) (0.110) (0.125) D-108-02 E 17.25 4.4 5.0 (0.680) (0.175) (0.200) D-108-03 F 20.5 7.1 7.6 (0.810) (0.280) (0.300) MATERIAL 1. INSULATION SLEEVE: HEAT-SHRINKABLE, RADIATION CROSS-LINKED POLYVINYLIDENE FLOURIDE. TRANSPARENT BLUE. 2. SOLDER PREFORM WITH FLUX: Solder: Sn96 Ag4 per ANSI J-STD-006. Flux: ROL1 per ANSI J-STD-004. 3 & 4. MELTABLE INSERTS: Polyolefin-based thermoplastic. Color : red. NOTES A. The parts covered by this SCD are for use in attaching a ground wire to the shield of a cable. They may be used on cables rated for at least 135 C minimum, having silver plated copper shields and meeting the dimensional criteria shown in the table. B. Parts will meet requirements of Raychem specification RT-1404 and National Aerospace Standard NAS-1747 when installed per Raychem-approved convection or infrared tools in accordance with Raychem assembly procedure RCPS-100-70. TEMPERATURE RATING: -55 C to +175 C. TITLE: Raychem Corporation THERMOFIT Raychem 300 Constitution Drive SOLDERSLEEVE DEVICES Menlo Park, CA 94025 SHIELD TERMINATOR USA UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. DOCUMENT NO. : D-108-00/-01/-02/-03 INCHES DIMENSIONS ARE BETWEEN BRACKETS. TOLERANCES: ANGLES: N/A Raychem reserves the right to amend this DCR NUMBER: REPLACES: 0.00 N/A drawing at any time. Users should evaluate D980867 D961392 0.0 N/A ROUGHNESS IN the suitability of the product for their 0 N/A MICRON application. DRAWN BY: DATE: PROD. REV. DOC ISSUE: SCALE: SIZE: SHEET: M. FORONDA 04/09/98 SEE TABLE 3 None A 1 of 1 If this document is printed it becomes uncontrolled. Check for the latest revision.