CUSTOMER DRAWING I.D. of Liner Insulation Sleeve Product Dimensions Product Received Recovered Weight Recovered Recovered L E Name Min Max Grams I.D. Wall max min Max Max Min D-436-0184 2.15 0.0 0.3 1.37 0.30 21.3 13.0 (0.085) (0.00) (0.055) (0.012) (0.840) (0.510) D-436-0185 4.8 0.0 0.5 2.41 0.33 21.7 13.0 (0.188) (0.00) (0.095) (0.013) (0.855) (0.510) D-436-0186 3.05 0.0 0.4 1.37 0.30 21.3 15.25 (Note B) (0.120) (0.00) (0.055) (0.012) (0.8.40) (0.600) Note A: This end of sleeve may have a 1.20mm (0.50) opening as received. Upon heating, sealing material will flow sufficiently to close end. Note B: D-436-0186 has a blue color code dot MATERIALS 1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride. 2. SEALING LINER: Fluorocarbon-based thermoplastic. Color: clear. APPLICATION 1. These parts are designed for use with Raychem parallel crimp splices to make environment-resistant stub splices in two wires having a combined insulation diameter less than the as received I.D. of the sleeve, and rated for at least +125C. 2. Temperature range: -55C to +150C. Parts may be installed by convection heating. TITLE: SEALING CAPS Unless otherwise specified dimensions are in DOCUMENT NO.: Raychem millimeters. D-436-0184/-0186 Devices Inches dimensions are shown in brackets TOLERANCES: ANGLES: N/A Tyco Electronics reserves the right to 0.00 N/A amend this drawing at any time. Users REV: DATE: 0.0 N/A ROUGHNESS should evaluate the suitability of the D September 20, 2011 0 N/A IN MICRON product for their application. PREPARED BY: CAGE CODE: ECO NUMBER: SCALE: SIZE: SHEET: UNGUYEN 06090 ECO-11-019172 NTS A 1 of 1 1998-2011 Tyco Electronics Corporation. All rights reserved. If this document is printed it becomes uncontrolled. Check for the latest revision.