FFFFBBBBIIIISSSS----IIIIIIII CCCCoooonnnnnnnneeeeccccttttoooorrrr PPPPrrrroooodddduuuucccctttt SSSSppppeeeecccciiiiffffiiiiccccaaaattttiiiioooonnnn
((((FFFFllllooooaaaattttiiiinnnngggg BBBBaaaatttttttteeeerrrryyyy IIIInnnntttteeeerrrrccccoooonnnnnnnneeeeccccttttiiiioooonnnn SSSSyyyysssstttteeeemmmm CCCCoooonnnnnnnneeeeccccttttoooorrrr)))) 108-61125
25APR11 Rev. A
FBIS-2 Connector
1. Scope:
1.1 Contents
This specification covers the requirements for product performance, test methods and quality assurance
provisions of FBIS-2 Connector.
Applicable product descriptions and part numbers are as shown in Appendix 2.
2. Applicable Documents:
The following documents form a part of this specification to the extent specified herein. In the event of conflict
between the requirements of this specification and the product drawing, the product drawing shall take
precedence. In the event of conflict between the requirements of this specification and the referenced
documents, this specification shall take precedence.
2.1 AMP Specifications :
A.109-5000 Test Specification,
General Requirements for Test Methods.
B.501-61056 Test Report:
2.2 Commercial Standards and Specifications:
A. MIL-STD-202Test Methods for Electronic and
Electrical Component Parts.
B.EIA 364Test Specification
1 of 7
nd
Tyco Electronics AMP Korea. (2 Fl. 1365-10 Seocho-Dong Seocho-Ku Seoul Korea, 137-070)
Copyright 2008 Tyco Electronics AMP Korea All international rights reserved.
* : Trademark FFFFBBBBIIIISSSS----IIIIIIII CCCCoooonnnnnnnneeeeccccttttoooorrrr 108-61125
((FFllooaattiinngg BBaatttteerryy IInntteerrccoonnnneeccttiioonn SSyysstteemm CCoonnnneeccttoorr))
((FFllooaattiinngg BBaatttteerryy IInntteerrccoonnnneeccttiioonn SSyysstteemm CCoonnnneeccttoorr))
3. Requirements
3.1 Design and Construction
Product shall be of the design, construction and physical dimensions specified on the applicable product drawing.
3.2 Materials
A. A. Contact
MaterialCopper Alloy
Finish Nickel-under plated all over.
Gold plated at contact area.
Gold flash plated at soldering area.
B. Housing
Thermoplastic Molding Compound
ColorBlack, UL94V-0 / UL94HB
C. Solder Peg
MaterialCopper Alloy
Finish Nickel-under plated all over.
Tin plated all over.
3.3 Ratings
A. Voltage Rating30V DC
B. Current Rating1.5 A /Contact
C. Temperature Rating 40 to +85
High limit temperature includes raised temperature by operation.
D. Keeping Temperature : 10 to +50
3.4 Performance Requirements and Test Descriptions
The product shall be designed to meet the electrical, mechanical and environmental performance
requirements specified in Fig. 1. All tests shall be performed in the room temperature, unless otherwise
specified.
Rev. A 2 of 7