Instruction Sheet CrimpingHeadCrossReference 408--2498 forPneumaticTools 11 APR 11 Rev E 626PneumaticToolingSystems WireSizeRange:26 - 6AWG Crimps The Following Products: PIDG* Terminals PLASTI--GRIP* Terminals SOLISTRAND* Terminals Relay Tab COPALUM* Terminals STRATO--THERM* Terminals AMPLI--BOND* Terminals TERMI--FOIL* Terminals Closed End Splices PneumaticTool69015 Wire Size Range:8 - 1/0 AWG Crimps The Following Products: PLASTI--GRIP* Terminals COPALUM* Terminals SOLISTRAND* Terminals AMPOWER* Terminals STRATO--THERM* Terminals AMPLI--BOND* Terminals Figure 1 1. INTRODUCTION products crimped, and wire size ranges. In addition, instruction sheet numbers for all crimping heads and The tools shown in Figure 1 are capable of crimping a pneumatic tools and an explanation of product wide variety of products on solid or stranded wire insulation barrel expansions are provided. sizes 26 through 1/0. The various configurations of the 626 Pneumatic Tooling Systems are identified in Reasons for reissue are provided in Section 5, Figure 2. All of these systems accept any of the Tool REVISION SUMMARY. Holder Assemblies and their associated Crimping Heads/Adapters, as indicated. The remainder of this Dimensions are in millimeters with inch NOTE instruction sheet contains tables which provide cross equivalents in brackets . Figures and illustrations referencing information on the tool, crimping head, are for reference only and are not drawn to scale. i E2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Company TOOLING ASSISTANCE CENTER 1--800--722--1111 This controlled document is subject to change. 1 of 5 All Rights Reserved PRODUCT INFORMATION 1--800--522--6752 For latest revision and Regional Customer Service, *Trademark visit our website at www.te.com LOC B TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product and/or Company names may be trademarks of their respective owners. ORIGINAL INSTRUCTIONS408-2498 Hand Actuated System FootActuated System (WithoutLogic) (WithoutLogic) PN 189721-1 PN 189722-1 Tool Holder Crimping Assemblies Heads/Adapters 626 Series Power Unit Crimping Heads (All Systems) PN 189767--1 Large Tool Holder PRO--CRIMPER* III Tool Adapter (Uses Various Dies) Platform Adapter (Uses Various Dies) PN 189766--1 Small Tool Holder Pneumatic Series Crimping Heads Straight Action Crimper 217200--1 189928--1 (Uses Various Dies) Adapter Holder Straight Action Crimp Head Adapter (Uses Various Crimping Heads Figure 2 2 of 5 Rev E