ANGLESTAR Electronic Clinometer SPECIFICATIONS o +/-60 sensing range Ratiometric and Bipolar DC models Sturdy plastic housing The AngleStar Electronic Clinometer is an angle measurement device that produces a DC voltage output signal proportional to the level and direction of angular displacement. The sensing element, which is fluid filled, produces a variable resistance as it is tilted in the sensitive axis. This change in resistance is then translated into a smooth DC output signal. Also see our other models, AccuStar -EA, AccuStar IP- FEATURES 66 (voltage or 2-wire current output, IP-66 rating), and the 60 total sensing range AngleStar Protractor System (AngleStar Electronic Internally damped Clinometer with digital readout). Rugged plastic housing Measurement Specialties, Inc. offers many other types of Connector or hard wire connection sensors. Data sheets can be downloaded from our web site at: ANGLESTAR Electronic Clinometer PERFORMANCE SPECIFICATIONS (COMMON) ELECTRICAL o Total range 60 o Linear range 45 Linearity o o Null to 10 0.1 o o 10 to 45 1% of reading o o 45 to 60 Monotonic o Resolution 0.001 o Null repeatability 0.05 o Cross axis error <1% up to 45 Time constant 0.3 seconds Frequency response 0.5Hz -3db ENVIRONMENTAL/MECHANICAL o o Operating temperature range -40 to +85 C o o Storage temperature range -55 to +85 C o o Temp. coefficient of null 0.008 / C o Temp. coefficient of scale factor 0.1% / C Electrical connection Pin terminals (solderable) Shell = Molex 22-01-2041 Mating connector Pins = Molex 08-50-0113 Notes: All values are nominal unless otherwise noted Dimensions are in inch mm unless otherwise noted DIMENSIONS AND CONNECTIONS (COMMON) Dimensions are in inches mm , and are nominal unless otherwise specified SENSOR SOLUTIONS /// AngleStar 9/2015 Page 2