NTC thermistors for
inrush current limiting
Leaded and coated disks
Series/Type: B57364S0***M0**
Date: May 2013
EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the
information contained therein without EPCOS' prior express consent is prohibited.
EPCOS AG is a TDK Group Company.Inrush current limiters B57364S0***M0**
ICLs S364
Applications Dimensional drawing
Switch-mode power supplies
Soft-start motors, e.g. in vacuum cleaners
Features
Useable in series connections
up to 265 V
RMS
Coated thermistor disk
Kinked leads of tinned copper wire
Wide resistance range
Manufacturer's logo, NTC and resistance value
stamped on
UL approval (E69802)
Dimensions in mm
Options
Approx. weight 4 g
Resistance tolerance <20% and alternative lead
configurations available on request
Delivery mode
Bulk (standard) or with cardboard tape on 500-mm reel
General technical data
Climatic category (IEC 60068-1) 55/170/21
Max. power (at 25 C) P 5.1 W
max
Resistance tolerance R /R 20 %
R R
Rated temperature T 25 C
R
Dissipation factor (in air) approx. 24 mW/K
th
Thermal cooling time constant (in air) approx. 100 s
c
Heat capacity C approx. 2400 mJ/K
th
Electrical specification and ordering codes
1) 1)
R
R I C C min Ordering code
25 max test test
(@ I , 25 C)
(0...65 C) 230 V AC 110 V AC max
A F F
1 16.0 1000 4000 0.021 B57364S0109M0**
2 12.0 1000 4000 0.036 B57364S0209M0**
2.5 11.0 1000 4000 0.044 B57364S0259M0**
4 9.5 1000 4000 0.059 B57364S0409M0**
5 8.5 1000 4000 0.073 B57364S0509M0**
10 7.5 1000 4000 0.098 B57364S0100M0**
** = Delivery mode
00 = Bulk
51 = Reel packing
1) For details on the capacitance C please refer toApplication note, chapter 1.6.
test
Please read Cautions and warnings and Page 2 of 18
Important notes at the end of this document.