STM32303C-EVAL Evaluation board for STM32F303xx microcontrollers Data brief Features STM32F303VCT6 microcontroller Four 5 V power supply options: Power jack ST-LINK/V2 USB connector User USB connector Daughterboard 2 I S Audio DAC, stereo audio jack which supports headset with microphone 2-Gbytes (or more) MicroSD card on SPI 2 I C compatible serial interface temperature sensor, EEPROM and RF-EEPROM RS-232 communication IrDA transceiver JTAG/SWD and ETM trace debug support, ST-LINK/V2 embedded 1-Mbit SPI serial Flash memory 240x320 TFT color LCD connected to the SPI interface Joystick with 4-direction control and selector Reset, Tamper or Key button 4-color user LEDs and high brightness LED Humidity sensor Extension connectors for daughter board or wrapping board MCU voltage: 3.3 V or adjustable 2.0 V - 3.6 V USB FS connector Touch-sensing buttons RTC with backup battery CAN 2.0A/B compliant connection Light-dependent resistor (LDR) IR receiver Potentiometer 2 motor control connectors April 2015 DocID023582 Rev 3 1/4 For further information contact your local STMicroelectronics sales office. www.st.com Obsolete Product(s) - Obsolete Product(s)Description STM32303C-EVAL 1 Description The STM32303C-EVAL evaluation board has been designed as a complete demonstration and development platform for the ARM Cortex -M4 core-based STM32F303VCT6 2 microcontroller. It features two I Cs, three SPIs, five USARTs, one CAN, four 12-bit ADCs, two 12-bit DACs, internal 40 Kbytes Data SRAM, 8 Kbytes Program SRAM and 256 Kbytes Flash, Touch sensing, USB FS, JTAG debugging support. This evaluation board can be used as the reference design for the development of users application but it is not considered as a final application. The full range of hardware features on the board is able to help the user to evaluate all peripherals (USB FS, USART, Audio DAC and ADC, TFT color LCD, IrDA, LDR, MicroSD card, motor control connectors, humidity sensor, high brightness LED, CAN, IR receiver, EEPROM, touch sensing buttons and temperature sensor, etc.) and develop his applications. Extension headers make it possible to easily connect a daughterboard or wrapping board for any specific application. An ST-LINK/V2 is integrated on the board, as an embedded in-circuit debugger and programmer for the STM32 MCU. The STM32303C-EVAL evaluation board does not support STM32F313xx MCUs (1.65 V to 1.95 V power supply). 2 Demonstration software The demonstration software is preloaded in the Flash memory of the board for an easy demonstration of the device peripherals in standalone mode. For more information and to download the latest version available, refer to the STM32303C-EVAL demonstration software available on www.st.com. 3 Ordering information STM32303C-EVAL is replaced by STM32303E-EVAL. To order the evaluation board for STM32F303xx microcontrollers, use the order code: STM32303E-EVAL. 2/4 DocID023582 Rev 3 Obsolete Product(s) - Obsolete Product(s)