M95M01-DWDW4TP/K

M95M01-A125 M95M01-A145 Automotive 1 Mbit serial SPI bus EEPROMs with high-speed clock Datasheet - production data Features Compatible with the Serial Peripheral Interface (SPI) bus Memory array SO8 (MN) 1 Mbit (128 Kbytes) of EEPROM 150 mil width Page size: 256 bytes Write protection by block: 1/4, 1/2 or whole memory Additional Write lockable Page (Identification page) Extended temperature and voltage ranges TSSOP8 (DW) 169 mil width Up to 125 C (V from 2.5 V to 5.5 V) CC Up to 145 C (V from 2.5 V to 5.5 V) CC High speed clock frequency 16 MHz for V 4.5 V CC 10 MHz for V 2.5 V CC Schmitt trigger inputs for noise filtering Short Write cycle time Byte Write within 4 ms Page Write within 4 ms Write cycle endurance 4 million Write cycles at 25 C 1.2 million Write cycles at 85 C 600 k Write cycles at 125 C 400 k Write cycles at 145 C Data retention 50 years at 125 C 100 years at 25 C ESD Protection (Human Body Model) 4000 V Packages RoHS-compliant and halogen-free (ECOPACK2 ) October 2014 DocID023214 Rev 6 1/40 This is information on a product in full production. www.st.comContents M95M01-A125 M95M01-A145 Contents 1 Description . 6 2 Signal description . 8 2.1 Serial Data output (Q) 8 2.2 Serial Data input (D) 8 2.3 Serial Clock (C) . 8 2.4 Chip Select (S) 8 2.5 Hold (HOLD) 8 2.6 Write Protect (W) 8 2.7 V ground . 8 SS 2.8 V supply voltage . 9 CC 3 Operating features . 10 3.1 Active power and Standby power modes . 10 3.2 SPI modes 10 3.3 Hold mode .11 3.4 Protocol control and data protection 11 3.4.1 Protocol control . 11 3.4.2 Status Register and data protection 12 3.5 Identification page 13 4 Instructions . 15 4.1 Write Enable (WREN) . 16 4.2 Write Disable (WRDI) 16 4.3 Read Status Register (RDSR) . 17 4.4 Write Status Register (WRSR) . 18 4.5 Read from Memory Array (READ) 19 4.6 Write to Memory Array (WRITE) . 20 4.7 Read Identification Page (RDID) . 22 4.8 Write Identification Page (WRID) . 23 4.9 Read Lock Status (RDLS) 23 4.10 Lock Identification Page (LID) . 24 2/40 DocID023214 Rev 6