SSC800-25-12

Panel Mount DataSheet SSC Series Ratings up to 25A 1000VDC DC control IGBT output Epoxy Free Design CE Compliant to EN60950-1 Improved SEMS screw and washer Redesigned housing with anti-rotation barriers For Generation 3 datasheet click here PRODUCT SELECTION Control Voltage 25A 8-16 VDC SSC1000-25-12 20-28 VDC SSC1000-25-24 AVAILABLE OPTIONS Termination Blank: Screws & clamp K: Installed standoffs with Rated Load Current screws for PC Board Series 25: 25 Amps mounting K SSC 1000 25 24 Operating Voltage Control Voltage 1000: 1-1000 VDC 12: 8-16 VDC Required for valid part number 24: 20-28 VDC For options only and not required for valid part number Not all part number conbinations are available. * Contact Crydom Technical Support for information on the availability of a specific part number. (1) OUTPUT SPECIFICATIONS Description 1000VDC Recommended Operating Voltage Vdc 1-1000 Absolute Maximum Rating Vdc 1200 Maximum Off-State Leakage Current Rated Voltage mA 0.3 Maximum Load Current Adc (2) 25 Minimum Load Current mA (3) 20 Maximum Surge Current (10 msec) Adc 75 Maximum On-State Voltage Drop Rated Current Vdc 1.55 Thermal Resistance Junction to Case (Rjc) C/W 0.45 Minimum Heat Sink for Rated Current 40 C/W 1 Maximum Pulse Wide Modulation Frequency Hz (4) 500 (1) INPUT SPECIFICATIONS Description Sufx -12 Sufx -24 24 VDC Nominal Control Voltage 12 VDC Control Voltage Range 8-16 VDC 20-28 VDC Maximum Reverse Voltage -16 VDC -28 VDC Minimum Turn-On Voltage 8 VDC 20 VDC Minimum Turn-Off Voltage 1 VDC 1 VDC Minimum Input Current (for on-state) 12.5 mA 12.5 mA Maximum Input Current 15 mA 15 mA Nominal Input Impedance Ohms Current Regulated Current Regulated Maximum Turn-On Time sec 200 200 Maximum Turn-Off Time sec 150 150 Do not forget to visit us at: www.crydom.com Copyright 2014 Crydom Inc. Specifications subject to change without notice.Panel Mount DataSheet (1) GENERAL SPECIFICATIONS Description Parameters Dielectric Strength, Input/Output/Base (50/60Hz) 3750 Vrms 9 Minimum Insulation Resistance ( 500 VDC) 10 Ohm Maximum Capacitance, Input/Output 8 pF Ambient Operating Temperature Range (5) -40 to 100C Ambient Storage Temperature Range -40 to 125 C Weight (typical) 2.88 oz (81.53 g) Housing Material UL94 V-0 Baseplate Material Aluminum Input Terminal Screw Torque Range (in-lbs/Nm) 13-15 /1.5-1.7 Load Terminal Screw Torque Range (in-lbs/Nm) 18-20 / 2.0-2.2 SSR Mounting Screw Torque Range (in-lbs/Nm) 18-20 / 2.0-2.2 Input/Load Terminal Screw Torque Range (in-lbs/Nm) (6) w/K option 8-10 / 0.9-1.13 Humidity 85% non-condensing 21,395,130 hours (2,441 years) MTBF (Mean Time Between Failures) at 40C ambient temperature (7) 11,545,504 hours (1,317 years) MTBF (Mean Time Between Failures) at 60C ambient temperature (7) WIRING DIAGRAM * Inductive loads must be diode suppresed. + + - V * * V Load Load - + + Recommended Wire Sizes Wire Size Wire Pull-Out Terminals (Solid / Stranded) Strength (lbs) N 2 24 AWG (0.2 mm ) / 0.2 minimum 10 44.5 Input +2 +2 1 OUTPUT 1 OUTPUT 2 2 x 12 AWG (3.3 mm ) / 3.3 maximum 90 400 S OL I D S T A T E R EL A Y S OL I D S T A T E R EL A Y 2 20 AWG (0.5 mm ) / 0.518 minimum 30 133 4 INPUT +3 4 INPUT +3 Output 2 2 x 10 AWG (5.3 mm ) / 5.3 110 490 2 2 x 8 AWG (8.4 mm ) / 8.4 maximum 90 400 + + V V - - EQUIVALENT CIRCUIT BLOCK DIAGRAMS +DC 3 2 +DC Control Trigger Circuit Circuit -DC 4 1 -DC Do not forget to visit us at: www.crydom.com Copyright 2014 Crydom Inc. Specifications subject to change without notice.