HD6050GHT

Panel Mount Datasheet HA / HD60T Series Ratings from 25A to 125A 48-660 VAC AC or DC control SCR output for heavy industrial loads Direct bond copper substrate Zero Voltage or instantaneous turn-on outputs Direct power lead frame UL/CSA/TUV Approved, CE Compliant to EN60950-1 Epoxy free design Improved SEMS screw and washer Redesigned housing with anti-rotation barriers For Generation 3 datasheet click here PRODUCT SELECTION Control Voltage 25A 50A 90A 125A 3-32 VDC HD6025T HD6050T HD6090T HD60125T 90-280 Vrms HA6025T HA6050T HA6090T HA60125T 18-36 Vrms HA6025ET HA6050ET HA6090ET HA60125ET AVAILABLE OPTIONS Control Voltage A: 90-280 VAC Overvoltage Protection Thermal Pad Switching Type D: 3-32 VDC Blank: Not Included Blank: Not Included Blank: Zero Voltage Turn-On Series AxxxxE: 18-36 VAC P: Included (3) (4) H: Included -10: Instantaneous Turn-On H A 60 25 E K P G H T -10 Operating Rated Load Current Termination Input Status LED Trigger Circuit Voltage 25: 25 Amps Blank: Screw Blank: Not Included T: Phototransistor 60: 48-660 VAC 50: 50 Amps F: Quick Connect (1) G: Included 90: 90 Amps (Up to 50 Amps models) 125: 125 Amps K: Hex standoffs (2) Required for valid part number For options only and not required for valid part number * Not all part number combinations are available. Contact Crydom Technical Support for informacion on the availability of a specific part number. (5) OUTPUT SPECIFICATIONS Description 25A 50A 90A 125A Operating Voltage (47-63Hz) Vrms 48-660 48-660 48-660 48-660 Transient Overvoltage Vpk 1200 1200 1200 1200 Maximum Off-State Leakage Current Rated Voltage mArms 5 5 5 5 Minimum Off-State dv/dt Maximum Rated Voltage V/sec 500 500 500 500 Maximum Load Current Arms (2)(6) 25 50 90 125 Minimum Load Current mArms 40 40 40 150 Maximum 1 Cycle Surge Current (50/60Hz) Apk 235/250 597/625 1145/1200 1670/1750 Maximum On-State Voltage Drop Rated Current Vrms (7) 1.15 1.15 1.15 1.15 Thermal Resistance Junction to Case (Rjc) C/W 0.8 0.45 0.27 0.22 Maximum 1/2 Cycle I t for Fusing (50/60Hz) A sec 285/259 1770/1629 6560/5976 13950/12709 Minimum Power Factor (at Maximum Load) 0.5 0.5 0.5 0.5 FDE-07-01 REV. A Do not forget to visit us at: www.crydom.com Copyright 2021 Crydom Inc. Specifications subject to change without notice.Panel Mount Datasheet (5) INPUT SPECIFICATIONS Description HD60xxT HA60xxT HA60xxET Control Voltage Range 3-32 VDC 90-280 Vrms 18-36 Vrms (8) Minimum Turn-On Voltage 3.0 VDC 90 Vrms 18 Vrms Must Turn-Off Voltage 1.0 VDC 10 Vrms 4.0 Vrms Minimum Input Current 2 mA 2 mA 2 mA Maximum Input Current 2.5 mA 4.9 mA 4 mA 60K Ohm Nominal Input Impedance Current Regulated 9K Ohm Maximum Turn-On Time msec 1/2 Cycle (9) 10 10 Maximum Turn-Off Time msec 1/2 Cycle 40 40 (1) GENERAL SPECIFICATIONS Description Parameters Ambient Storage Temperature Range -40 to 125 C Dielectric Strength, Input/Output/Base (50/60Hz) 4000 Vrms 9 Minimum Insulation Resistance ( 500 VDC) 10 Ohm Maximum Capacitance, Input/Output 8 pF Ambient Operating Temperature Range -40 to 80 C Weight (typical) 2.6 oz (74.9 g) Housing Material UL94 V-0 Baseplate Material Aluminum Input Terminal Screw Torque Range in-lb/Nm 13-15 / 1.5-1.7 Load Terminal Screw Torque Range in-lb/Nm 18-20 / 2.0-2.2 SSR Mounting Screw Torque Range in-lb/Nm 18-20 / 2.0-2.2 Input/Load Terminal Screw Torque Range in-lb/Nm (2) w/K option 8-10 / 0.9-1.13 Input/Output Terminal Screw Thread Size 6-32 UNC / 8-32 UNC Humidity per IEC60068-2-78 93% non-condensing LED Input Status Indicator w/G option (green) MTBF (Mean Time Between Failures) at 40C ambient temperature (10) 11,641,553 hours (1,328 years) MTBF (Mean Time Between Failures) at 60C ambient temperature (10) 7,210,376 hours (823 years) WIRING DIAGRAM AC Input Current vs Input Voltage Recommended Wire Sizes V T Option - High Voltage Output Wire Size Wire Pull-Out Terminals 2.5 (Solid / Stranded) Strength (lb) N (11) Load 2 24 AWG (0.2 mm ) / 0.2 minimum 10 44.5 2 Input 1 ( ) 2 ( ) 2 2 x 12 AWG (3.3 mm ) / 3.3 maximum 90 400 1.5 2 20 AWG (0.5 mm ) / 0.518 minimum 30 133 1 2 Output 2 2 x 10 AWG (5.3 mm ) / 5.3 110 490 1 OUTPUT S OL I D S T A T E R EL A Y 2 0.5 2 x 8 AWG (8.4 mm ) / 8.4 maximum 90 400 4 INPUT 3 0 0 5 10 15 20 25 30 DC Input Voltage 4 ( / ) 3 (+ / ) EQUIVALENT CIRCUIT BLOCK DIAGRAMS Diagram: HD60xxxxT Diagram: HA60xxT -DC 4 1 AC 4 1 AC AC Trigger AC/DC (13) Trigger (13) Converter Circuit Circuit (12) (12) AC 3 2 AC +DC 3 2 AC Current Limiter Do not forget to visit us at: www.crydom.com Copyright 2021 Crydom Inc. Specifications subject to change without notice. Input Current (mA)