HAC24D150-10

Panel Mount Datasheet HAC Series Load Voltage range 24 to 660 VAC Output rating up to 150 Arms Zero Voltage or Instantaneous Turn-on options AC or DC input control options Locking Input Connector Optional Transient Protection & installed Thermal Pad PRODUCT SELECTION Control Voltage 150 A HAC24D150 ,HAC60D150 3-32 VDC 90-140 VAC HAC24B150 ,HAC60B150 150-270 VAC HAC24A150 ,HAC60A150 AVAILABLE OPTIONS Control Voltage A: 150-270 VAC Overvoltage Protection Switching Type B: 90-140 VAC Blank: Not Included Blank: Zero Voltage Turn-On Series D: 4-32 VDC P: Included (6) -10: Instantaneous Turn-On (5) HAC 24 A 150 P H -10 Operating Voltage Rated Load Current Thermal Pad 24: 24-280 VAC 150: 150 Amps Blank: Not Included 60: 48-660 VAC H: Included Required for valid part number For options only and not required for valid part number OUTPUT SPECIFICATIONS (1) Description HAC24x150 HAC60x150 Operating Voltage (47-63Hz) Vrms 24-280 48-660 Transient Overvoltage Vpk 600 1200 Maximum Off-State Leakage Current Rated Voltage mA 1 1 500 500 Maximum Off-State dv/dt Maximum Rated Voltage V/Sec Maximum Load Current Arms (2) 150 150 Minimum Load Current Arms 0.15 0.15 Maximum Surge Current Apk 1 Cycle 50/60 Hz 1670/1750 1670/1750 Maximum It for fusing (10msec)/(8.33msec) Asec 13950/12709 13950/12709 Maximum On-State Voltage Drop Rated Current Vrms 1.15 1.15 Thermal Resistance Juncti on to Case (Rjc) C/W 0.15 0.15 Minimum Power Factor (with Maximum load) 0.5 0.5 Wire Size max (solid/stranded) AWG/ IEC mm (3) 2/0 / 67.4 2/0 / 67.4 Output Terminal Nut Torque Range in lb (Nm) 225-300 (25.4-33.9) 225-300 (25.4-33.9) HP Rating UL 508/IEC60957 HP (KW) : 240 VAC 10 (7.5) N/A HP Rating UL 508/IEC60947 HP (KW) : 480 VAC N/A 25 (18.75) Do not forget to visit us at: www.crydom.com Copyright 2016 Crydom Inc. Specifications subject to change without notice.Panel Mount Datasheet INPUT SPECIFICATIONS (1) HACxxD150 HACxxA150 HACxxB150 Description Control Voltage Range 4-32 VDC (10) 150-270 VAC 90-140 VAC Minimum Turn-Off Voltage 4 VDC 150 VAC 90 VAC Must Turn-Off Voltage 1 VDC 10 VAC 10 VAC Minimum Input Current (for on-state) mA 9 6 7 Maximum Input Current mA 15 10 12 Current Regulated Nominal Input Impedance Ohms Current Regulated Current Regulated Maximum Turn-On Time msec (4) Cycle 20 20 Maximum Turn-Off Time msec Cycle 30 30 GENERAL SPECIFICATIONS (1) Description Parameters Dielectric Strength, Input/Output (50/60Hz) 3750 Vrms Dielectric Strength, Input/Output/Base (50/60Hz) 2500 Vrms 9 Minimum Insulation Resistance ( 500 V DC) 10 Ohm Maximum Capacitance, Input/Output 10 pF Ambient Operating Temperature Range -30 to 80 C Ambient Storage Temperature Range -40 to 125 C Weight (typical) lbs/grams 0.75/340.2 Housing Material PBT 30% GF, UL 94 V-0 SSR Mounting Torque Range in lbs/Nm 18-20 (2-2.2) LED Input Status Indicator (color) YES (Green) Humidity 85% non-condensing Input Terminal (7) Detachable barrier strip GENERAL NOTES (1) All parameters at 25C unless otherwise specified. (2) Heat sinking required, see derating curves. (3) TRM3/0 lug terminal must be used. (4) Turn-on time for Instantaneous turn-on versions is 0.02 msec. (5) Instantaneous turn-on version is not recommended for capacitive loads. Use zero turn-on only. (6) Output will self-trigger (450-600Vpk for HAC24 and 900-1200Vpk for HAC60), not suitable for capacitive loads. (7) Connector/Plug Not included. See Suggested Mating Connectors/Plugs (8) Elective Overvoltage Protection, P option. (9) Load can be wired to either SSR output terminal 1 or 2. C (10) Increase minimum voltage by 1V for operations from -20 to -30 WIRING DIAGRAM AC V Load Input Current vs Input Voltage L2 ( ) L1 ( ) Standard Regulated DC Inputs 25 LOAD SIDE 20 L2 L1 15 SOLID STATE CONTACTOR 10 HAC60D150 5 INPUT 4-32 VDC 0 STATUS 0 5 10 15 20 25 30 DC Input Voltage (- / ) (+ / ) Do not forget to visit us at: www.crydom.com Copyright 2016 Crydom Inc. Specifications subject to change without notice. Input Current (mA)