GNR35BCZ

DIN Rail Mount Datasheet GNR 45mm Series Current ratings of 35 and 45 amps Output voltage rating: 48-600 VAC Direct Bond Copper (DBC) Substrate LED input status indicator UL 508 Endurance Rating for Enhanced Reliability UL/CSA Approved, CE Compliant Built-in overvoltage protection DIN Rail or Panel Mount Zero voltage or Instantaneous turn-on output PRODUCT SELECTION Control Voltage 35A 45A 4-32 VDC GNR35DHZ GNR45DHZ 90-140 VAC GNR35BHZ GNR45BHZ 180-280 VAC GNR35AHZ GNR45AHZ AVAILABLE OPTIONS Operating Voltage Switching Type A: 180-260 VAC R: Instantaneous Turn-on B: 90-140 VAC (for DC control only) Series D: 4-32 VDC Z: Zero voltage Turn-on GNR 35 A H Z Terminal Layout Rated Load Current C: Contactor configuration 35: 35 Amps H: Relay configuration 45: 45 Amps Required for valid part number For options only and not required for valid part number (1) OUTPUT SPECIFICATIONS Description GNR35 GNR45 Operating Voltage (47-440Hz) Vrms 48-600 48-600 Transient Overvoltage Vpk, t=1 min. 1100 1100 Maximum Load Current Arms 35 45 Minimum Load Current Arms 0.1 0.1 Maximum Off-State Leakage Current Rated Voltage mArms 0.25 0.25 Static Off-State dv/dt ( V/sec, Ta=25C) (2) 500 500 1 Second Surge Current (Apk Ta=25C) 50/60 Hz 130 150 Forward Voltage Drop (Vpk max, Ta=25C) 1.35 1.35 Maximum Surge Current (50/60 Hz, 1 cycle) Apk 668/700 716/750 Maximum I t for Fusing (50/60Hz, 1/2 cycle ) A sec 2230/2020 2562/2334 HP Ratings at 120V / FLC Arms 1.5/20 1.5/20 HP Ratings at 240V / FLC Arms 3/17 3/17 HP Ratings at 480V / FLC Arms 5/14 5/14 Min/Max stranded wire 16/8 AWG 16/8 AWG Min/Max solid wire 16/10 AWG 16/10 AWG FDE-07-01 REV. A Do not forget to visit us at: www.crydom.com Copyright 2018 Crydom Inc. Specifications subject to change without notice.DIN Rail Mount Datasheet (1) INPUT SPECIFICATIONS Description GNRxxDx GNRxxBx GNRxxAx Control Voltage Range (3) 4.0-32 VDC 90-140 Vrms 180-280 Vrms Minimum Turn-On Voltage 4.0 VDC 90 Vrms 180 Vrms Must Turn-Off Voltage 1.0 VDC 10 Vrms 10 Vrms Minimum Input Current (for on-state) 16 mA 5 mArms 6 mA Maximum Input Current 19 mA 6 mArms 8 mA Input Resistance Current Regulated Current Regulated Current Regulated Maximum Turn-Off Time msec 1/2 Cycle 20 20 Maximum Turn-On Time msec (4) 1/2 Cycle 30 30 Min/Max stranded/solid wire 24/16 AWG 24/16 AWG 24/16 AWG (1) GENERAL SPECIFICATIONS Description Parameters Ambient Operating Temperature Range (3) -20 to 80C Ambient Storage Temperature Range -40 to 100 C 4000 Vrms Dielectric Strength, Input to Output (50/60Hz) Dielectric Strength, Input/Output to Ground (50/60Hz) 2500 Vrms Maximum Capacitance, Input/Output 8 pF Housing Material UL 94V0 (self extinguishing) Input Status Indicator Green LED Weight (typical) 14.1oz (400g) GENERAL NOTES (1) All parameters at 25C unless otherwise specied. (2) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 (3) For 180-280 VAC Control. Maximum Ambient operating temperatures is 60C. (4) Turn-on time for Instantaneous version (R sufx) is 0.1 msec (for DC control only). For additional information or specic questions, contact Crydom Technical Support. (1) MECHANICAL SPECIFICATIONS Tolerances: 0.02 in / 0.5 mm All dimensions are in: inches millimeters 1.77 Contactor Configuration 45.0 1.40 0.37 35.6 9.4 4.75 0.18 120.7 4.5 DIA. +3/A1 1/L1 3.47 3.47 88.1 GNR45DCZ 3.82 88.1 3.47 45 AMP 48-680 VAC 97.0 88.1 AC-51 (IEC 60947-4-3) 04 - 32 VDC IN 0.28 2/T1 -4/A2 7.1 0.18 4.5 DIA. 0.37 1.40 9.4 35.6 Do not forget to visit us at: www.crydom.com Copyright 2018 Crydom Inc. Specifications subject to change without notice.