ATS48C17Q

Product data sheet ATS48C17Q Characteristics soft starter for asynchronous motor - ATS48 - 162 A - 230..415 V - 37..132 KW Main Range of product Altistart 48 Product or component type Soft starter Product destination Asynchronous motors Product specific application Heavy duty industry and pumps Device short name ATS48 Us rated supply voltage 230...415 V (- 15...10 %) Motor power kW 75 kW at 230 V (connection to the motor delta terminals) for severe applications 75 kW at 400 V (connection in the motor supply line) for severe applications 90 kW at 230 V (connection to the motor delta terminals) for standard applications 90 kW at 400 V (connection in the motor supply line) for standard applications 110 kW at 400 V (connection to the motor delta terminals) for severe applications 132 kW at 400 V (connection to the motor delta terminals) for standard applications 37 kW at 230 V (connection in the motor supply line) for severe applications 45 kW at 230 V (connection in the motor supply line) for standard applications Power dissipation in W For severe applications 391 W For standard applications 479 W Utilisation category AC-53A Type of start Start with torque control (current limited to 5 In) IcL starter rating 140 A (connection in the motor supply line) for severe applications 242 A (connection to the motor delta terminals) for severe applications 294 A (connection to the motor delta terminals) for standard applications 170 A (connection in the motor supply line) for standard applications IP degree of protection IP00 Complementary Assembly style With heat sink Function available External bypass (optional) Supply voltage limits 195...456 V Supply frequency 50...60 Hz (- 5...5 %) Network frequency 47.5...63 Hz Device connection In the motor supply line To the motor delta terminals Factory setting current 162 A Uc control circuit voltage 220 - 15 % to 415 + 10 %, 50/60 Hz Control circuit consumption 30 W Dec 28, 2017 1 Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applicationsDiscrete output number 2 Discrete output type (LO1) logic output 0 V common configurable (LO2) logic output 0 V common configurable (R1) relay outputs fault relay NO (R2) relay outputs end of starting relay NO (R3) relay outputs motor powered NO Output absolute accuracy precision +/- 5 % Minimum switching current Relay outputs 10 mA at 6 V DC Maximum switching current Logic output 0.2 A at 30 V DC Relay outputs 1.8 A at 230 V AC inductive load, cos phi = 0.5, L/R = 20 ms Relay outputs 1.8 A at 30 V DC inductive load, cos phi = 0.5, L/R = 20 ms Discrete input number 5 Discrete input type PTC, 750 Ohm at 25 C (Stop, Run, LI3, LI4) logic, <= 8 mA 4300 Ohm Discrete input voltage 24 V (<= 30 V) Discrete input logic Positive logic (Stop, Run, LI3, LI4) state 0 < 5 V and <= 2 mA, state 1 > 11 V and >= 5 mA Supply inrush current Adjustable 0.4...1.3 Icl Analogue output type (AO) current output 0-20 mA or 4-20 mA <= 500 Ohm Communication port protocol Modbus Connector type 1 RJ45 Communication data link Serial Physical interface RS485 multidrop Transmission rate 4800, 9600 or 19200 bps Installed device 31 Protection type Phase failure (line) Thermal protection (motor) Thermal protection (starter) Marking CE Type of cooling Forced convection Operating position Vertical +/- 10 degree Height 340 mm Width 200 mm Depth 265 mm Product weight 12.4 kg Power range 30...50 kW at 200...240 V 3 phases 55...100 kW at 380...440 V 3 phases 55...100 kW at 200...240 V 3 phases 110...220 kW at 380...440 V 3 phases Motor starter type Soft starter Environment Electromagnetic compatibility Conducted and radiated emissions conforming to IEC 60947-4-2 level A Conducted and radiated emissions conforming to IEC 60947-4-2 level B Damped oscillating waves conforming to IEC 61000-4-12 level 3 Electrostatic discharge conforming to IEC 61000-4-2 level 3 Immunity to electrical transients conforming to IEC 61000-4-4 level 4 Immunity to radiated radio-electrical interference conforming to IEC 61000-4-3 level 3 Voltage/Current impulse conforming to IEC 61000-4-5 level 3 Standards EN/IEC 60947-4-2 Product certifications UL SEPRO DNV NOM 117 CCC C-Tick TCF CSA GOST Vibration resistance 1 gn (f = 13...200 Hz) conforming to EN/IEC 60068-2-6 1.5 mm (f = 2...13 Hz) conforming to EN/IEC 60068-2-6 Shock resistance 15 gn for 11 ms conforming to EN/IEC 60068-2-27 2