FTMH-105-03-L-DV-TR

F-219 FTM12502LDV FTMH11602LDVP 10 YEAR MFG WITH 30 GOLD FTMH11102FDVESA EXTENDED LIFE PRODUCT HIGH MATING CYCLES (1.00 mm) .0394 SMT MICRO TERMINAL STRIPS Mates with: SPECIFICATIONS CLM, MLE Optional For complete specifications and pick & place recommended PCB layouts pads see www.samtec.com FTMH or www.samtec.com FTM Insulator Material: Black Liquid Crystal Polymer Terminal Material: Phosphor Bronze Current Rating (FTMH/CLM): 2.8 A per pin (2 pins powered) Operating Temp Range: -55 C to +125 C Plating: Sn or Au over 50 (1.27 m) Ni RoHS Compliant: Low profile Yes (1.79 mm) .071 Surface PROCESSING mount Lead-Free Solderable: Yes -DV Lead Coplanarity: (0.10 mm) .004 max -DH Lead Coplanarity: TYPE LEAD PLATING NO. PINS (0.10 mm) .004 max (05-25) 1 (0.15 mm) .006 max (26-50)* STRIP STYLE OPTION PER ROW *(.004 stencil solution may be available contact IPG samtec.com) FTMH 02 F RECOGNITIONS = 05 thru 50 = (1.91 mm) .075 Post = Gold flash on post, For complete scope of FTMH (Mates with MLE) Matte Tin on tail recognitions see = SMT Micro www.samtec.com/quality FTM L 03 = 02 thru 50 (unshrouded) FTM = 10 (0.25 m) = 05 thru 46 (shrouded) = (1.65 mm) .065 Post = Micro Low Profile Gold on post, Matte Tin on tail FILE NO. E111594 (Mates with CLM) FTMH OPTION B No. of positions (1.91) (1.57) x (1.00) .03937 .075 ES 02 100 .062 DIA ALSO AVAILABLE (4.06) EC (MOQ Required) (3.10) .160 (4.32) (3.17) .122 .170 (5.49) .125 EP End shrouds with .216 board locks (3.84) (1.22) 01 99 Molded end shrouds for .151 FTMH .048 FTMH 05 through 08 positions No. of positions LEAD Other platings A x (1.00) .03937 + B STYLE ES OPTION EP OPTION (1.91) 02 EC OPTION .075 (1.65) (3.18) 03 .065 .125 X (5.08) .200 (1.00) A (5.00) (0.30) .012 SQ TYP .03937 .197 (3.18) .125 A (0.69) .027 (1.49) (1.80) .059 .071 (2.59) (5.21) (0.64) .025 .102 P OPTION Note: .205 Shrouded option removed for clarity DIA Some sizes, styles and DV OPTION DH OPTION A OPTION options are non-standard, non-returnable. Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtecs specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.FTMH12803LDVEP FTMH12202FDVEC FTMH13502FDH FTMH12002LDV FTM12502LDV FTMH, FTM SERIES SMT MICRO TERMINAL STRIPS Low profile (1.27 mm) .050 Surface mount Shrouded and alignment pin Flex Shroud options available options available ROW OTHER FLEX SHROUD OPTIONS OPTION OPTIONS (FTMH-DV only with (FTM only) DV A 9 pins/row minimum) = Dual Vertical = Alignment Pin S (3 positions minimum) ES = End Shroud Metal or plastic at Samtec discretion DH = End Shroud (05 positions minimum). (FTMHDV only) = Dual Horizontal Molded or press-fit shroud at (FTMH only) Samtecs discretion EC K (See assembly print at = End Shroud with Locking Clip = (2.50 mm) .098 DIA Polyimide www.samtec.com FTM (Manual placement required) Film Pick & Place Pad for dimensions) (FTMHDH only) 02 50 EP = End Shroud with Guide Post SA P (Use only when mating with CLM) = End Shroud with Alignment Pins (3.18) = Plastic Pick & Place Pad (5.21) (05 through 46 positions) .205 .125 (DV only) (6 positions minimum FTMH) (7 positions minimum FTM) 01 49 FTM FTM OPTION C TR No. of positions x (7.00) FTM = Tape & Reel (1.00) .03937 + C S .276 02 46 LEAD D (4.00) STYLE SA .157 (1.91) 02 (3.23) (4.44) .075 .127 .175 (1.65) (2.54) 03 .065 .100 x 01 45 (5.08) .200 (0.30) .012 SQ TYP (1.27) (0.97) (3.18) .038 .050 (3.56) (1.40) (3.56) D .125 .140 .055 .140 No of positions (1.00) S OPTION P OPTION x (1.00) .03937 DV OPTION .039 DIA (1.50) .059 Shrouded options removed for clarity SA OPTION Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtecs specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.