S100X125YAJ

18900 Panduit Drive TDS: GMY6 Tinley Park, IL 60487 Effective Date: 27MAY2015 Customer Service: 800-777-3300 Revision: 9 Technical Data Sheet Laser/Inkjet Printable Polyester Film This specification is intended to outline the physical and chemical properties of PANDUITs pressure sensitive laser and inkjet printable polyester material and include the following part numbers and printable material identifiers: Part Number Prefixes Printable Material Suffixes LJSL*Y Y*J PLL PRODUCT SPECIFICATIONS: Description: Material is RoHS compliant (European Union directive 2002/95/EC). Material is top coated to provide a laser/inkjet printable surface. This material is halogen free. Print Methods: This material is recommended for laser and inkjet printing. Adhesive: Acrylic based, pressure sensitive permanent adhesive. Standard Colors: Clear with white/colored print-on area Thickness: 2.0 +/- 0.3 mils (substrate and adhesive) Service Temperature Range: -65F to 225F (-54C to 107C) Minimum Application Temperature: 50F (10C) Storage Conditions: Store at 70F (21C) and 50% Relative Humidity. PROPERTIES: PERFORMANCE: Peel Adhesion to Stainless Steel: 35 oz/in width (PSTC-101, 15 min. dwell) Shear Adhesion: 24+ hours (PSTC-107, Procedure A) Tensile Strength: MD 56lbs/ inch width +/- 15% (ASTM D882) TD 72 lbs/inch width +/- 15% (ASTM D882) MD 160% +/- 15% (ASTM D882) Elongation: TD 120% +/- 15% (ASTM D882) Elevated Temperature Exposure: After 8 hours at 275F (135C) there was no deterioration of the substrate 2 Tack: 470 g/cm (ASTM D-2979-71, 1 sec dwell) Immersion Resistance: Printed samples were applied to stainless steel panels and immersed in Isopar L and Isopar M solutions to determine if the printing would smear or if the adhesive would degrade. Immersion Time Visual Changes 10 minutes None 30 minutes None 60 minutes None 24 hours None *3000 hours no change observed (ASTM G154) UV Resistance: *3000 hours equates to 5 years of assimilated Outdoor UV exposure. Page 1 of 2 2005 PANDUIT Corp TDS: GMY6 18900 Panduit Drive TDS: GMY6 Tinley Park, IL 60487 Effective Date: 27MAY2015 Customer Service: 800-777-3300 Revision: 9 Technical Data Sheet Air Handling Spaces: Meets the outgassing requirements of ASTM E-595 suitable for use in air handling spaces. CHEMICAL/SOLVENT RESISTANCE: Samples were laser and inkjet printed. These samples were laminated to flat steel panels and were also wrapped around a 1/12 OD wire. The test was conducted at room temperature after 24 hour dwell. The samples were then immersed in the specified reagents for 5 immersions using the following cycle: a 10 minute immersion time followed by a 30 minute recovery time. After the fifth immersion, the samples were conditioned for 24 hours before testing. Percent retention of performance for samples on flat steel panels was based on a 48 hour adhesion value of 50 oz/inch width. Chemical Reagent Visual Observation Print Percent Retention of Performance Laser Inkjet Distilled Water No effect No effect No effect 98% Mineral Spirits No effect No effect No effect 96% Toluene Slight adhesive bleed No effect No effect 91% Isopropyl alcohol No effect No effect No effect 96% Methanol No effect No effect No effect 91% Acetone Slight adhesive bleed No effect No effect 87% Methyl Ethyl Ketone Slight adhesive bleed No effect No effect 87% 1,1,1 Trichloroethane No effect No effect No effect 94% Freon TF No effect No effect No effect 87% Super Agitene No effect No effect No effect 90% Jet A Fuel No effect No effect No effect 90% Arco Truslide 68 No effect No effect No effect 89% SAE 30 Motor Oil No effect No effect No effect 102% 10% Nitric Acid No effect No effect No effect 92% PSTC: Pressure Sensitive Tape Council (U.S.A.) ASTM: American Society for Testing and Materials (U.S.A.) Approval UL Recognized: UL969 File Number: MH14979 (white print-on area labels) LIMITED WARRANTY All PANDUIT Identification Solution Products (except for Software programs) are warranted to be free from defects in material and workmanship at the time of sale but our obligation under this warranty is limited to replacement of the product proved to be defective within 6 months from the date of sale, or in the case of printers, within 90 days from the date of sale. This warranty is void if the products or printers are modified, altered or misused in any way. Use of PANDUIT printers with any product other than the specified PANDUIT products for which the printer was designed constitutes misuse. Before using, the user shall determine the suitability of the product for its intended use and user assumes all risk and liability whatsoever in connection therewith. The foregoing may not be altered except by an agreement signed by officers or seller and manufacturer. NEITHER PANDUIT OR SELLER SHALL BE LIABLE FOR ANY OTHER INJURY, LOSS OR DAMAGE, WHETHER DIRECT OR CONSEQUENTIAL, ARISING OUT OF THE USE OF, OR THE INABILITY TO USE THE PRODUCT OR THE PRINTER. THIS WARRANTY IS MADE IN LIEU OF AND EXCLUDES ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS OF PARTICULAR USE ARE SPECIFICALLY EXCLUDED. The information contained in this literature is based on our experience to date and is believed to be reliable. It is intended as a guide or use by persons having technical skill at their own discretion and risk. We do not guarantee favorable results or assume any liability in connection with its use. Dimensions contained herein are for reference purposes only. This publication is not to be taken as a license to operate under, or a recommendation to infringe any existing patents. This supersedes and voids all previous literature, etc. Page 2 of 2 2005 PANDUIT Corp TDS: GMY6