ISFCH6X04ABL-UG

IndustrialNet Category 6A SF/UTP Copper Cable SPECIFICATION SHEET specifications Category 6A 4-pair SF/UTP copper cable shall meet or exceed the IEC 61156-6, ANSI/TIA-568-C.2 Category 6A and ODVA Ethernet/IP standards up to 80 IndustrialNet Category 6A meters. The stranded copper conductors shall be 24/7 and 26/7 AWG with high SF/UTP Copper Cable density polyethylene (HDPE) insulation. The copper conductors shall be twisted in pairs and wrapped with a foam polypropylene tape to form a core. All pairs 24/7 AWG CMX/CM shall then be surrounded by an overall braided shield and metallic foil and 4-pair: ISFCH6X04A**-UG covered with a thermoplastic elastomer (TPE) jacket. The jacket shall be oil, 26/7 AWG CMX/CM UV, weld splatter, and abrasion resistant for enhanced chemical resistance 4-pair: and mechanical performance. The jacket shall be flame retardant (CMX/CM) ISFCH6X04B**-UG for Industrial Ethernet applications. This cable shall support high-flex IndustrialNet Category 6A applications and be rated for panel or on-machine applications where space RJ45 Field Terminable Plug is shared with 600V high voltage cables. Field technical information terminable plug: ISPS688FAS Certified component performance up to 80 meters and exceeds the Electrical performance: requirements IEC 61156-6 Category 6A, ANSI/TIA-568-C.2 Category 6A IndustrialNet M12 X-Code to RJ45 Panel Mount Adapter UL AWM Style 2463 (80C 600V) Standard compliances: Flex Life Test: 1 million cycles at 10 x cable diameter 10 million cycles Straight: ICAM12XRJS at 20x cable diameter 90 degree angle: ICAM12X90RJS Torsion Life Test: 3 million cycles, 270 Oil resistance 6 months 20C Mini-Com Modular Patch Panel Four pairs of 24/7 AWG and 26/7 stranded copper insulated with high density Conductors/insulators: polyethylene (HDPE) insulation 8-port: CDPP8RG 24 AWG = 1.1mm (0.045 in.) nominal Insulation diameter: DIN Rail Adapter 26 AWG = 0.86mm (0.034 in.) nominal 1-port: CADIN1IW*** PoE+ compliant Meets IEEE 802.3af and IEEE 802.3at for PoE applications CMX/CM (UL1685) Flame rating: **To designate color, add suffix TL (Teal), IEC 60332-1, IEC 60754-1 and -2, IEC 61034-2, EN50575: Eurcolass Fca BL (Black). ***For standard colors other than Off White, 110 N (25 lbf) maximum Installation tension: replace IW in part number with BL (Black), EI (Electric Ivory), IG (International Gray), Temperature rating: -40C to 80C (-40F to 176F) during transport, installation, and operation or WH (White). Thermoplastic elastomer (TPE), oil, sunlight, weld splatter, and Cable jacket: abrasion resistant 24 AWG = 8.1mm (0.322 in.) nominal Cable diameter: 26 AWG = 7.3mm (0.290 in.) nominal 18 kg/305m (40 lbs./1000 ft.) Cable weight: Packaged 305 meters (1000 feet) on a reel Packaging: Package tested to ISTA Procedure 1A key features and benefits Third party tested Cable has been tested by an independent laboratory and complies with the electrical standard requirements of IEC 61156-6 Category 6A and ANSI/TIA-568-C.2 Category 6A standards Reliability Shielded SF/UTP cable construction protects against environmental elements that can cause electrical performance failures stranded conductors for high flex applications and ease of installation cable jacket is oil, sunlight, weld splatter, and abrasion resistant for enhanced chemical resistance and mechanical performance High flex applications Life cycle tested for robotic and c-track use Rated for panel or on-machine applications when the space is shared with 600V on-machine 600V high voltage power cables applications applications IndustrialNet Category 6A SF/UTP Copper Cable Key applications include: provides reliability and high performance as an 10BASE-T (Ethernet) integral component of the end-to-end solution for 100BASE-T (Fast Ethernet) industrial Ethernet based communications networks. 1000BASE-T (Gigabit Ethernet) The 4-pair high performance cable ensures highest 10GBASE-T (Gigabit Ethernet) availability in conditions seen in industrial Control panel deployments featuring power source environments. The cable incorporates a durable oil voltages and UV resistant TPE jacket meeting Appliance Downlinks from control panel to the machine area Wiring Material requirements and rated for panel or Uplinks featuring gigabit data transmission on-machine applications when the space is shared from the control panel to the consolidation point with 600V high voltage power cables. High flex applications Robotic, C-Track www.panduit.com IndustrialNet Category 6A SF/UTP Copper Cable additional specifications Mechanical Test Ultimate Breaking Strength >400 N (90 lbf.) Minimum Bend Radius 2x cable diameter Electrical Test Nominal Velocity of Propagation (NVP) 68% 80V Operating Voltage, Maximum cable construction ISFCH6X04A ISFCH6X04B Stranded Conductor Wire Stranded Conductor Wire Conductor Conductor Insulator Insulator Barrier Layer Barrier Layer Braid Foil Shield Foil Shield Pair Separator Pair Separator Braid Jacket Jacket WORLDWIDE SUBSIDIARIES AND SALES OFFICES PANDUIT US/CANADA PANDUIT EUROPE LTD. PANDUIT SINGAPORE PTE. LTD. PANDUIT JAPAN PANDUIT LATIN AMERICA PANDUIT AUSTRALIA PTY. LTD. Phone: 800.777.3300 London, UK Republic of Singapore Tokyo, Japan Guadalajara, Mexico Victoria, Australia Phone: 44.20.8601.7200 Phone: 65.6305.7575 Phone: 81.3.6863.6000 Phone: 52.33.3777.6000 Phone: 61.3.9794.9020 For a copy of Panduit product warranties, log on to www.panduit.com/warranty For more information 2018 Panduit Corp. Visit us at www.panduit.com/ia ALL RIGHTS RESERVED. iai panduit.com COSP433--SA-ENG 9/2018