For FPC/FFC FPC/FFC connectors (0.5mm pitch) Y5BH Back lock Impedance matching products with 0.5 mm pitch and high versatility (for FPC/FFC) FEATURES 1. Differential impedance matching (85, 90) compliant with various high-speed transmission standards. 2. 0.5 mm pitch, 1.8 mm height and double top and bottom contact construction. 3. Supports USB 3.1 Gen. 2 high-speed transmission standard (Transmission speed: up to 10 Gbps)* *Universal serial Bus 3.1 Specication Reversion 1.0) 4. Contributes to customer cost savings by using impedance matching FFC. APPLICATIONS Electronic devices such as PCs, laptop, tablet PCs, DSC, DVC and TV. DETAILED FEATURES FPC/FFC connector for high-speed transmission. By matching the differential impedance, this FPC/FFC connector offers excellent high-speed differential transmission characteristics and supports all high-speed transmission standards. (when pin assignments are GSSG). FPC FFC Improvement of mechanical design exibility Prevent displacement of FPC insertion With top and bottom contact construction and no pin Constructed to make positional displacement difcult by assignments, this FPC/FFC connector contributes to customers surrounding the four sides on the FPC inlet side with wall design exibility. molding ACCTB106E 201803-T 1 FPC/FFC connectors Y5BH (0.5mm pitch) ORDERING INFORMATION PRODUCT TYPES Packing Height Differential impedance Number of pins Part number Inner carton (1-reel) Outer carton 1.8 mm 85 and 90 types 40 AYF564035 3,000 pieces 6,000 pieces Notes: 1. Order unit For volume production: 1-inner carton (1-reel) units. For samples, please contact our sales ofce. 2. Please contact our sales ofce for connectors having a number of pins other than those listed above. SPECIFICATIONS 1. Characteristics The followings show specications, when using an applicable FPC (thickness 0.30 mm) Item Specications Conditions Rated current 0.4A/pin contact Rated voltage 50V AC/DC No short-circuiting or damage at a detection current of 1 mA Dielectric strength 250V AC for 1 min. when the specied voltage is applied for one minute. Insulation resistance Min. 1,000M (initial) Using 250V DC megger (applied for 1 min.) Electrical characteristics Based on the contact resistance measurement method Contact resistance Max. 100m specied by JIS C 5402. Differential signal 8510 (Connector part) Rise times (Tr): 40 ps (20 to 80%) Differential impedance 9010 (Connector part) (FPC and PC board: Differential impedance 85 or 90 controlled.) Measurement of the maximum force applied until the Mechanical FPC/FFC holding force Min. 0.10N/pin contact pin contacts (initial) inserted compatible FPC is pulled out in the insertion axis characteristics direction while the connector lever is closed Ambient temperature 55 to +85C No icing. No condensation. Reow soldering: Peak temperature: 260C or less The initial specication must be satised electrically Soldering heat resistance (on the surface of the PC board around the connector and mechanically. terminals) Soldering iron: 300C within 5 sec. 350C within 3 sec. 55 to +85C (product only) Storage temperature No icing. No condensation. 40 to +50C (emboss packing) Conformed to MIL-STD-202F, method 107G Order Temperature (C) Time (minutes) 0 5 cycles, 1 553 30 Environmental Thermal shock resistance insulation resistance min. 100M, 2 Max. 5 characteristics (with FPC/FFC mated) +3 contact resistance max. 100m 3 85 0 30 4 Max. 5 0 553 120 hours, Humidity resistance Conformed to IEC60068-2-78 insulation resistance min. 100M, (with FPC/FFC mated) Temperature 402C, humidity 90 to 95% R.H. contact resistance max. 100m 24 hours, Saltwater spray resistance Conformed to IEC60068-2-11 insulation resistance min. 100M, (with FPC/FFC mated) Temperature 352C, saltwater concentration 51% contact resistance max. 100m H2S resistance 48 hours, Temperature 402C, gas concentration 31 ppm, (with FPC/FFC mated) contact resistance max. 100m humidity 75 to 80% R.H. Lifetime Insertion and removal life 20 times Repeated insertion and removal: min. 10 sec./time characteristics Unit weight 40 pins: 0.26 g ACCTB106E 201803-T 2