74HC4851PW-Q100

74HC4851-Q100 74HCT4851-Q100 8-channel analog multiplexer/demultiplexer with injection-current effect control Rev. 3 18 February 2020 Product 1. General description The 74HC4851-Q100 74HCT4851-Q100 are high-speed Si-gate CMOS devices and are specified in compliance with JEDEC standard no. 7A. The 74HC4851-Q100 74HCT4851-Q100 are 8-channel analog multiplexers/demultiplexers with three digital select inputs (S0 to S2), an active-LOW enable input (E), eight independent inputs/outputs (Y0 to Y7) and a common input/output (Z). The devices feature injection-current effect control, which has excellent value in automotive applications where voltages in excess of the supply voltage are common. With E LOW, one of the eight switches is selected (low impedance ON-state) by S0 to S2. With E HIGH, all switches are in the high-impedance OFF-state, independent of S0 to S2. The injection-current effect control allows signals at disabled analog input channels to exceed the supply voltage without affecting the signal of the enabled analog channel. This eliminates the need for external diode/resistor networks typically used to keep the analog channel signals within the supply-voltage range. This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications. 2. Features and benefits Automotive product qualification in accordance with AEC-Q100 (Grade 1) Specified from -40 C to +85 C and from -40 C to +125 C Injection-current cross coupling < 1 mV/mA Wide supply voltage range from 2.0 V to 6.0 V for 74HC4851-Q100 ESD protection: MIL-STD-883, method 3015 exceeds 2000 V HBM JESD22-A114F exceeds 2000 V MM JESD22-A115-A exceeds 200 V (C = 200 pF, R = 0 ) Latch-up performance exceeds 100 mA per JESD 78 Class II level A Low ON-state resistance: 400 (typical) at V = 2.0 V CC 215 (typical) at V = 3.0 V CC 120 (typical) at V = 3.3 V CC 76 (typical) at V = 4.5 V CC 59 (typical) at V = 6.0 V CC Multiple package options DHVQFN package with Side-Wettable Flanks enabling Automatic Optical Inspection (AOI) of solder joints 3. Applications Analog multiplexing and demultiplexing Digital multiplexing and demultiplexing Signal gating Automotive applicationNexperia 74HC4851-Q100 74HCT4851-Q100 8-channel analog multiplexer/demultiplexer with injection-current effect control 4. Ordering information Table 1. Ordering information Type number Package Temperature range Name Description Version 74HC4851D-Q100 -40 C to +125 C SO16 plastic small outline package 16 leads SOT109-1 body width 3.9 mm 74HCT4851D-Q100 74HC4851PW-Q100 -40 C to +125 C TSSOP16 plastic thin shrink small outline package SOT403-1 16 leads body width 4.4 mm 74HCT4851PW-Q100 74HC4851BQ-Q100 -40 C to +125 C DHVQFN16 plastic dual in-line compatible thermal SOT763-1 enhanced very thin quad flat package no leads 74HCT4851BQ-Q100 16 terminals body 2.5 x 3.5 x 0.85 mm 5. Functional diagram 11 0 10 0 8 X 9 7 2 6 G8 Y0 13 S0 Y1 MUX/DMUX 11 14 13 0 S1 Y2 10 15 14 1 S2 Y3 9 12 15 2 Y4 1 12 3 3 Y5 1 5 4 Y6 5 2 5 E Y7 2 6 6 4 3 4 7 Z 001aad541 001aad542 Fig. 1. Logic symbol Fig. 2. IEC logic symbol 74HC HCT4851 Q100 All information provided in this document is subject to legal disclaimers. Nexperia B.V. 2020. All rights reserved Product Rev. 3 18 February 2020 2 / 19