Last Update: 6-10-10 Ref. : MS-100920 Dimensions: mm (in.) Epoxy Seal 5.08 10.16 (.20) 2.54 (.40) (.10) 2.54 3 .51 4.80 (.10) 3 8.13 (.02) 2 (.189) 2 (.32) 1 1 .76 (.03) 3.30 (.13) 4.65 (.183) 13.54 (.533) POS.1 POS.2 2.54 (.10) ON ON 2-3 2-1 1.09 1 1 (.043) 2 Comm. 2 Comm. 3 3 P.C. Mounting Switch Function Electrical Specifications: Mechanical Specifications: Note: Contact resistance: 20m max. initial 2-4VDC 100mA Mechanical life: 50,000 make-and-break cycles RoHS Compliant by Exemption Insulation resistance: 1,000M min. Operating temperature: -30C to 85C Dieletric strength: 1,000 V RMS sea level Soldering Process: Rating: 1A / 250VAC 3A / 120VAC or 28VDC Manual Soldering: Use a soldering iron of 30 watts, controlled at 350C approximately 5 sec. while applying Solder. Wave Soldering: Recommended soldering temperature: 2605C Duration of solder immersion: 51 sec. (PCB is 1.6mm in thickness) Sealed Sub-Miniature Toggle Switch 108-2AS1T1203-EVX www.mouser.com 1-800-346-6873 Available from Mouser Electronics Specifications are subject to change without notice. No liability or warranty implied by this information. Environmental compliance based on producer documentation.