MP1530DM-LF

MP1530 Triple Output Step-Up Plus Linear Regulators for TFT Bias The Future of Analog IC Technology DESCRIPTION FEATURES The MP1530 combines a triple output step-up 2.7 to 5.5V Operating Input Range converter with linear regulators to provide a 2.8A Switch Current Limit complete DC/DC solution. It is designed to 3 Outputs In a Single Package power TFT LCD panels from a regulated 3.3V Step-Up Converter up to 22V or 5V supply. Positive 20mA Linear Regulator Negative 20mA Linear Regulator This device integrates a 1.4MHz 250m Internal Power MOSFET Switch fixed-frequency step-up converter with positive Up to 95% Efficiency and negative linear regulators. The step-up 1.4MHz Fixed Frequency converter switch node drives two charge pumps, which supply powers to their respective Internal Power-On Sequencing linear regulators. The positive and negative Adjustable Soft-Start/Fault Timer linear regulator inputs can withstand up to 38V Cycle-by-Cycle Over Current Protection and down to -20V, respectively. Under Voltage Lockout Ready Flag A single on/off control enables all 3 outputs. 16-Pin, QFN (3x3mm) or TSSOP Packages The outputs are internally sequenced at startup for ease of use. An internal soft-start prevents APPLICATIONS input overload at startup. Cycle-by-cycle current TFT LCD Displays limiting reduces component stress. Portable DVD Players The MP1530 is available in a tiny 3x3mm, 16- Tablet PCs pin QFN package or a 16-pin TSSOP package. Car Navigation Displays EVALUATION BOARD REFERENCE For MPS green status, please visit MPS website under Quality Assurance. MPS and The Future of Analog IC Technology are Trademarks of Monolithic Board Number Dimensions Power Systems, Inc. EV0055 2.4X x 2.3Y x 0.4Z TYPICAL APPLICATION V IN Efficiency vs 3.3V/5V Load Current (Step-Up Converter Only) 100 V = 5.0V IN 90 CT RDY IN 80 OFF ON EN SW V MAIN V = 3.3V IN COMP FB1 TO 70 SW 60 IN2 MP1530 50 IN3 V GL GL 40 FB2 GH V GH 30 V = 13V FB3 MAIN REF 20 GND PGND 1 10 100 1000 LOAD CURRENT (mA) MP1530 Rev. 1.41 www.MonolithicPower.com 1 5/25/2011 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. 2011 MPS. All Rights Reserved. EFFICIENCY (%)MP1530 TRIPLE OUTPUT STEP-UP PLUS LINEAR REGULATORS FOR TFT BIAS ORDERING INFORMATION Part Number Package Top Marking Free Air Temperature (T ) A QFN16 (3x3mm) MP1530DQ* B8 -40 C to +85 C TSSOP16 MP1530DM** M1530DM -40 C to +85 C * For Tape & Reel, add suffix Z (g. MP1530DQZ). For RoHS compliant packaging, add suffix LF (e.g. MP1530DQLFZ) * *For Tape & Reel, add suffix Z (g. MP1530DMZ). For RoHS compliant packaging, add suffix LF (e.g. MP1530DMLFZ) PACKAGE REFERENCE TOP VIEW PGND IN3 GH IN2 TOP VIEW 16 15 14 13 RDY 1 16 CT SW 1 12 GL FB1 2 15 SW COMP 3 14 PGND CT 2 11 EN IN 4 13 IN3 GND 5 12 GH RDY 3 10 FB3 REF 6 11 IN2 FB1 4 9 FB2 FB2 7 10 GL FB3 8 9 EN 5 6 7 8 COMP IN GND REF QFN16 TSSOP16 (1) IN3, GH Voltage .................................. 0V to 38V ABSOLUTE MAXIMUM RATINGS Maximum Junction Temp. (T ) .............. +125C J IN Supply Voltage .......................... 0.3V to +6V SW Voltage .................................. 0.3V to +25V (3) Thermal Resistance JA JC IN2, GL Voltage ........................... +0.3V to 25V QFN16 (3 x 3mm) ................... 60 ...... 12 ... C/W IN3, GH Voltage ........................... 0.3V to +40V TSSOP16 ................................ 90 ...... 30 ... C/W IN2 to IN3 Voltage ....................... 0.3V to +60V All Other Pins ................................. 0.3V to +6V Notes: (2) 1) Exceeding these ratings may damage the device. Continuous Power Dissipation (T = +25C) A 2) The maximum allowable power dissipation is a function of the QFN16 (3 x 3mm)....2.1W maximum junction temperature T (MAX), the junction-to- J ambient thermal resistance , and the ambient temperature TSSOP16 ....1.4W JA T . The maximum allowable continuous power dissipation at A Junction Temperature ............................... 125 C any ambient temperature is calculated by P (MAX) = (T D J Lead Temperature .................................... 260 C (MAX)-T )/ . Exceeding the maximum allowable power A JA dissipation will cause excessive die temperature, and the Storage Temperature ............. 65C to +150 C regulator will go into thermal shutdown. Internal thermal shutdown circuitry protects the device from permanent Recommended Operating Conditions (2) damage. 3) The device is not guaranteed to function outside of its Input Voltage ................................... 2.7V to 5.5V operating conditions. Main Output Voltage ........................... V to 22V 4) Measured on approximately 1 square of 1 oz copper. IN IN2, GL Voltage ................................ 0V to 20V MP1530 Rev. 1.41 www.MonolithicPower.com 2 5/25/2011 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. 2011 MPS. All Rights Reserved.