EV5030D-QH-00A USB Charging Port Controller with Current Limit Switch, Supporting CDP, DCP Modes DESCRIPTION FEATURES The EV5030D-QH-00A is an evaluation board Load Current Detection and Status for MP5030D, which integrates an USB current Indication limit switch and charging port identification Up to 14V Operating Input Voltage Range circuit. It achieves 3A continuous output current Support DCP schemes for BC 1.2, Divider over a wide input supply range. Mode and 1.2V/1.2V Mode Support CDP Mode for USB 2.0 Data With MP5030D, it supports Dedicated Charging Line Drop Compensation Port (DCP) and Charging Downstream Port Programmable High Accuracy Current (CDP) schemes for Battery Charging Limit specification (BC1.2), the divider Mode, 32m Low-R Power MOSFET 1.2V/1.2V Mode without the need for external DS(ON) user interaction. Input over Voltage Shutdown Protection Thermal Shutdown MP5030D provides linear line drop compensation, load current detection and APPLICATIONS status indication. USB Charging Downstream Port (CDP) Fault condition protection includes hiccup USB Dedicated Charging Ports (DCP) current limiting, input OVP and thermal All MPS parts are lead-free, halogen-free, and adhere to the RoHS directive. For shutdown. MPS green status, please visit the MPS website under Quality Assurance. MPS and The Future of Analog IC Technology are registered MP5030D requires a minimum number of trademarks of Monolithic Power Systems, Inc. readily standard external components to complete USB switch and charging mode auto detection solution. MP5030D is available in QFN-10(1.5mmx2mm) package. ELECTRICAL SPECIFICATION Parameter Symbol Value Units System Input Voltage VIN 12 V Default Output VOUT 5 V Voltage Output Current IOUT 3 A EV5030D-QH-00AEVALUATION BOARD (LW)4.38cm 2.89cm Board Number MPS IC Number EV5030D-QH-00A MP5030DGQH EV5030D-QH-00A Rev. 1.0 www.MonolithicPower.com 1 2/20/2019 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. 2019 MPS. All Rights Reserved. EV5030D-QH-00A, CHARGING CONTROLLER SUPPORTING CDP, DCP EVALUATION BOARD SCHEMATIC NOTE: In the default settings, MODE pin short to GND for CDP mode. EV5030D-QH-00A Rev. 1.0 www.MonolithicPower.com 2 2/20/2019 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. 2019 MPS. All Rights Reserved.