MIC47100-12YMME-TR

MIC47100 1A High Speed Low VIN LDO General Description Features The MIC47100 is a high speed, Low V LDO capable of IN Operating voltage range: delivering up to 1A and designed to take advantage of - Input Supply: 1.0V to 3.6V point of load applications that use multiple supply rails to - Bias Supply: 2.3V to 5.5V generate a low voltage, high current power supply. The 0.8V to 2.0V output voltage range MIC47100 is stable with only a 1F ceramic output High bandwidth very fast transient response capacitor and is available in a thermally enhanced 2mm 2mm MLF package thus making it an optimal PSRR >50dB at 100kHz solution for board-constrained applications. Stable with a 1F ceramic output capacitor The MIC47100 has an NMOS output stage offering very Low dropout voltage of 80mV at 1A low output impedance. The NMOS output stage offers a High output voltage accuracy: unique ability to respond very quickly to sudden load - +/- 1.5% initial accuracy changes such as that required by a microprocessor, DSP - +/- 2% over temperature or FPGA. The MIC47100 consumes little quiescent current and therefore can be used for driving the core Logic level enable input voltages of mobile processors, post regulating a core UVLO on both supply voltages for easy turn-on DC/DC converter in any portable device. ePad MSOP-8 small form factor power package The MIC47100 is available in fixed and adjustable output Thermally enhanced 2mm 2mm MLF smallest voltages in the exposed pad MSOP-8 package and the tiny solution 2mm 2mm MLF package with an operating junction temperature range of -40C to +125C. Data sheets and support documentation can be found on Applications: Micrels web site at: www.micrel.com. Point of Load PDAs DSP, PLD and FPGA Power Supply Low Voltage Post Regulation Typical Application MicroLead Frame and MLF are registered trademark of Amkor Technology Micrel Inc. 2180 Fortune Drive San Jose, CA 95131 USA tel +1 (408) 944-0800 fax + 1 (408) 474-1000 Micrel, Inc. MIC47100 Ordering Information Part Number Marking Code Nominal Output Package Lead Finish (1) Voltage (2) MIC47100YML EAA ADJ 8-Pin 2mm 2mm MLF Pb free (2) MIC47100-0.8YML E08 0.8V 8-Pin 2mm 2mm MLF Pb free (2) MIC47100-1.0YML E10 1.0V 8-Pin 2mm 2mm MLF Pb free (2) MIC47100-1.2YML E12 1.2V 8-Pin 2mm 2mm MLF Pb free MIC47100YMME ZEAAY ADJ 8-pin e-MSOP Pb free MIC47100-08YMME ZE08Y 0.8V 8-pin e-MSOP Pb free MIC47100-10YMME ZE10Y 1.0V 8-pin e-MSOP Pb free MIC47100-12YMME ZE12Y 1.2V 8-pin e-MSOP Pb free Note: 1. Other Voltage available. Contact Micrel for details. 2. MLF is a Green RoHS compliant package. Lead finish is NiPdAu. Mold compound is Halogen free M9999-092908-B September 2008 2