CV-PS5210

Innovation has a brand new color. Introducing the new CV-5200 Connection Validation Soldering Station Metcal is raising the bar with a technology that will change hand soldering forever. Metcal soldering stations have led the way with SmartHeat technology for 35 years. SmartHeat senses the thermal load and instantly delivers Power on Demand directly to the joint. The embedded, self-regulating heater delivers the right amount of power based on the requirements of the solder joint. This provides a fast, safe and repeatable process with no calibration required. Currently, the industry standard relies on a visual inspection of the solder joint. Metcal has developed a better way Introducing Connection Validation.CV-5200 Series Specications Connection Validation Soldering Station The intermetallic compound thickness is critical in System Conguration the formation of a solder joint. Connection Validation (CV) evaluates the quality of the solder joint by The CV-5210 soldering station includes: calculating the intermetallic compound formation and CV Power supply provides closed loop feedback to the operator. CV-H1-AV: Advanced hand-piece with integrated LED light* CV provides feedback to the operator via the LED MX-W1AV: TipSaver Workstand* light ring integrated in the hand-piece. It takes the risk associated with the variables involved in the Additional system congurations will be available soon. soldering activity and removes the success and failure *Can be ordered separately. determination of a good solder joint out of the hands of the operator. Technical Specications CV complements the skill of the operator to judge the quality of a solder joint by introducing an CV-5200 Connection Validation Power Supply objective method of evaluating solder joint quality. 10 to 40 C Ambient Operating Temp. This systemic and objective approach provides Max. Enclosure Temp. 55C repeatability and a measureable standard to the soldering process. 100 240 VAC, grounded circuit Input Line Voltage Input Line Frequency 50/60 Hz Rated Power Consumption 125W Features and Benefits 80W max. Output Power Output Frequency 13.56 MHz SmartHeat Power on Demand Technology Induction Heating Method Patented Connection Validation IMC Formation Technology Display 2.8 Color TFT LCD Display 2.8 color touchscreen with bold graphics Resolution 320*240 RGB Communications Port for process traceability 2.8 Diagonal Size data and rmware graphics Integrated Net Power Meter and power graph Active Area 43.20 x 57.60 mm With optional precise tip temperature display Single Port Connections Patented Chip-in-Cartridge technology Communications USB Closed loop bi-directional communication Power Supply Dim. w x d x h 121 x 130 x 235 Stores and records cartridge attributes (mm) Provides traceability information Power Supply Weight (kg) 3.35 Protects power supply from non-conforming Certication / Marking CE TUV cartridges Backwards compatible with MX series power <2mV Tip-to- Ground Potential supplies Tip-to-Ground Resistance <2ohms Password protection Idle Temperature Stability 1.1C in still air Meets or exceeds IPC J-STD-001 Tip Temperature Accuracy Standard L=183cm (72), burn proof, ESD Hand-piece cable length safe Hand-piece connectors RF Connector F type power connector 6 pin DIN LED Power Connector 2 single port or dynamic dual Operation simultaneous LED equipped hand piece Tip temperature displayed signals to operator when on large color screen. Via USB port and appropriate a good solder joint is formed. Firmware upgrade software with compatible computer and cables.