TIME DELAY RELAYS TR-5 Series Non-Programmable Plug-in 8 Pin SPDT Versions Off Delay, Single Shot & Watchdog INPUT VOLTAGE PRODUCT WIRING/ FUNCTION 50/60Hz. NUMBER ** SOCKETS OFF DELAY 120V AC/DC TR-51662-** Control Switch Trigger 12V DC TR-51666-** 8 PIN OCTAL 24V AC/DC TR-51668-** 70169-D 240V AC TR-51661-** SINGLE SHOT 120V AC/DC TR-51562-** Control Switch Trigger 12V DC TR-51566-** 24V AC/DC TR-51568-** 240V AC TR-51561-** These are 8 pin 10A SPDT WATCHDOG 120V AC/DC TR-51362-** versions of our standard 11 pin Control Switch Trigger 12V DC TR-51366-** DPDT products (Retriggerable 24V AC/DC TR-51368-** Single Shot) 240V AC TR-51361-** DIAGRAM 11 Onboard & remote adjustable OFF DELAY 120V AC/DC TR-51962-** 8 PIN OCTAL or fixed time delays from 0.05 Power Trigger 12V DC TR-51966-** 70169-D seconds to 2 hours 24V AC/DC TR-51968-** Uses industry-standard 8 pin 240V AC TR-51961-** octal socket SINGLE SHOT 120V AC/DC TR-51762-** PowerTrigger 12V DC TR-51766-** 24V AC/DC TR-51768-** 240V AC TR-51761-** WATCHDOG 120V AC/DC TR-51862-** Power Trigger 12V DC TR-51866-** (Retriggerable 24V AC/DC TR-51868-** with appropriate socket Single Shot) 240V AC TR-51861-** DIAGRAM 37 See Pages 77-79 for definitions & explanations of Timing Functions. ** Complete Product Number using two-digit Code from Table below. Note: if these products are ordered with the Remote Adjust Potentiometer modification (suffix -Rx), they will require an 11 pin octal socket see www.macromatic.com/remote for information. Time Delays TR-5 Series Products have three time delay options: Onboard Adjustable Time Delay--complete ** TIMING RANGE TABLE Product Number by adding two-digit Code from Time Delay Range Code Table at right, i.e., TR-51662-05 is an Off Delay 0.05 - 5 Sec. 04 with a time delay range of 0.1-10 seconds. 0.1 - 10 Sec. 05 Onboard Fixed Time Delay--replace two-digit 0.3 - 30 Sec. 07 Code with suffix F followed by delay 0.1 ... 100 0.6 - 60 Sec. 08 followed by (S) seconds, (M) minutes or (H) 1.2 - 120 Sec. 09 hours, i.e., TR-51662-F5S is an Off Delay with a 1.8 - 180 Sec. 10 time delay fixed at 5 seconds. 3 - 300 Sec. 12 0.1 - 10 Min. 22 Remote Time Delay--Selected TR-5 Series 0.3 - 30 Min. 15 products can be built with two terminals for 0.6 - 60 Min. 16 remote adjustable or fixed time delays. See 1.2 - 120 Min. 17 www.macromatic.com/remote for information. Application Data & Dimensions Page 61 800-238-7474 Sockets & Accessories Pages 80 & 81 www.macromatic.com sales macromatic.com 8/11 60 TIME DELAY RELAYS TR-5 Series Non-Programmable Plug-in 8 Pin SPDT Versions Application Data & Dimensions Application Data Voltage Tolerance: Temperature: o o o o AC Operation: +10/-15% of nominal at 50/60 Hz. -28 to 65 C (-18 to 149 F) DC Operation: +10/-15% of nominal. Output Contacts: Load (Burden): SPDT 10A 240V AC/30V DC, Maximum of 2 VA for all voltages 1/2HP 120/240V AC (N.O.), 1/3HP 120/240V AC (N.C.) B300 & R300 AC15 & DC13 Setting Accuracy: Life: Maximum Setting (Adjustable): +5%, -0% Minimum Setting (Adjustable): +0%, -50% Mechanical: 10,000,000 operations Fixed Time Delay: +2% Full Load: 100,000 operations Repeat Accuracy (constant voltage and temperature): Compatibility: +0.1% or + 0.04 seconds, whichever is greater Using a solid state switch to initiate the time sequence is acceptable. See www.macromatic.com/leakage or contact Reset Time: Macromatic for information regarding leakage current limits and Input Voltage (All Functions) 0.100 Seconds other solid state design considerations. Triggered Functions only 0.04 Seconds Triggering Off Delay, Single Shot or Watchdog Units: Start-up Time: Timing sequence must be initiated only after input voltage is (Time from when power is applied until unit is timing) applied to unit. Minimum required trigger switch closure time is 0.05 Seconds 0.05 seconds. Maintain Function Time: Approvals: (Time unit continues to operate after power is removed) 0.01 Seconds for all units File E109466 File LR45565 Low Voltage & with EMC Directives appropriate EN60947-1, EN60947-5-1 socket File E109466 Dimensions All Dimensions in 2.4 Inches (Millimeters) (60) 2.9 (74) 3.5 1.7 (89) (43) 8/11 61