EL-USB-1-RCG

EL-USB-1-RCG Temperature Data Logger with Rechargeable Baertt y -20 to +60C (-4 to +140F) measurement range Stores over 32,000 readings EasyLog software available as a free download Stainless steel (316 grade) case Rechargeable Lithium-Ion baertt y Logging rates between 1 second and 12 hours Immediate and delayed logging start User-programmable alarm thresholds Red & green status LEDs behind protective glass window Environmental protection to IP67 Supplied with Type A-Mini B USB cable This standalone data logger measures and stores more than 32,000 temperature readings over a -20 to +60C (-4 to +140F) range with a resolution of 0.1C (0.2F). The polycarbonate window and stainless steel 316 assembly provides protection from corrosion, impact and water ingress to IP67/NEMA 4X. The user can easily set up the logger and view downloaded data by connecting the data logger to a PCs USB port and using the free EasyLog software. Data can then be graphed, printed and exported to other applications for detailed analysis. The data logger is powered by a Lithium-Ion baertt y which can typically allow for logging for up to 1 month. SPECIFICATIONS INCLUDED IN THE BOX Measurement range -20 to +60C (-4 to +140F) CABLE USB A-MF Type A - Mini B USB Cable Internal resolution 0.1C (0.2F) Accuracy (overall error) 1C (2F) Logging rate User selectable between 1 second & 12 hours Operating temperature range -20 to +60C (-4 to +140F) Baertt y Life 4 weeks (at 20C and 1 minute logging rate) Recharging time 5 hours Charging temperature range +10 to +30C (+50 to +86F) Readings 32,510 Dimensions 93 x 20mm (3.66 x 0.78) CALIBRATION CERTIFICATES NOW AVAILABLE Lascar now offers a Traceable Calibration Certificate Service on Temperature Data Loggers. Using reference equipment which has been calibrated by a UKAS/NIST accredited laboratory and using apparatus traceable to national or international standards. For more information, please see www.lascarelectronics.com.EL-USB-1-RCG Temperature Data Logger with Rechargeable Baertt y LED STATUS INDICATION EL-USB-1-RCG features two LEDs: The first LED flashes red to indicate that the EL-USB-1-RCG is in an alarm condition. It will flash when the logged temperature has exceeded a Low or High alarm level. The second LED flashes green to indicate that the EL-USB-1-RCG is not in an alarm condition. Using EL-WIN-USB it is possible to set the alarm to remain active even if the reading has returned to normal, in which case the alarm LED will continue to flash red. This Hold feature in the software ensures the user is notified that at some point an alarm level has been exceeded, without needing to download the data. Hold is enabled by default, and can be turned off via the control software. The red LED will then only flash whilst the logger is in an alarm condition. When the temperature returns to normal, the green LED will flash. Green single flash (every 30 seconds) The data logger is not currently logging, but is primed to start at a later date and time (delayed start) Green single flash (every 10 seconds) The data logger is currently logging. No alarm Red single flash (every 10 seconds) The data logger is currently logging. Low alarm Red double flash (every 10 seconds) The data logger is currently logging. High alarm Green single flash (every 20 seconds) The data logger is currently logging. Low baertt y Red single flash (every 20 seconds) The data logger is currently logging, however the baertt y is running low. Low alarm Red double flash (every 20 seconds) The data logger is currently logging, however the baertt y is running low. High alarm Green double flash (every 20 seconds) The data logger is full and has stopped logging Red & Green single flash alternately (every 20 seconds) The data logger is full and has stopped logging. High or low alarm No LEDs flash The data logger is stopped, the baett ry is empty or there is no baett ry www.lascarelectronics.com Issue 6 05/2016 N.R Page 2 of 3