CZ400-020

Hybrid Thermal/EMI Absorber CoolZorb 400 Series CoolZorb 400 is a hybrid absorber/thermal management material that is used for EMI mitigation. Product is used like a traditional thermal interface material between heat source such as an IC and heat sink or other heat transfer device or metal chassis. CoolZorb 400 also functions to suppress unwanted energy coupling, resonances or surface currents causing board level EMI issues. FEATURES AND BENEFITS Designed using silicone gel binder that imparts inherent tack typical of standard thermal gap fillers Filler particle composition imparts both good thermal conductivity and EMI suppression in the microwave frequency range with best aenuatt tion performance at or above 5 GHz. CoolZorb 400 passes UL94V0 requirements Product does not require peel and stick adhesive when used like a traditional thermal interface material due to its tacky, compliant properties VALUE Performance advantage comes from dual functional properties of thermal conductivity and EMI reduction Improved reliability performance of electronics o Better signal integrity due to reduction of EMI o Consistent performance of electronics due to temperature stability and low outgassing properties of product Improved EMC performance and resultant lower cost to meet compliance requirements Environmentally friendly solution that meets regulatory requirements including RoHS and REACH TYPICAL PROPERTIES DATA TEST METHOD Color Dark gray Visual Thermal conductivity 2.0W/m-K ASTM D5470 Density 4.5 g/cc ASTM D792 Hardness 56 Shore 00 ASTM D2240 Tensile strength 60 psi ASTM D638 o o Temperature Range -20 C to 100 C NA UL Flammability UL94V0 UL 10 Volume resistivity 5.9 x 10 ASTM D257 Outgassing (TML) 0.15% ASTM E595-07 Outgassing (CVCM) 0.06% ASTM E595-07 Coefficient Of Thermal Expansion (CTE) 186 m/mC IPC-TM-650 2.4.41 Standard Thickness range .020-.130 (0.5-3.3mm) Thickness Tolerance +/- .005 (+/-.127mm) USA: +1.866.928.8181 Europe: +49.0.8031.2460.0 Asia: +86.755.2714.1166 www.lairdtech.com Hybrid Thermal/EMI Absorber CoolZorb 400 Series CoolZorb 400 Thermal Resistance at 100C (ASTM D5470) CoolZorb 400 Percent Deflection (ASTM D575) CoolZorb Aenuatt tion (dB/cm) AVAILABILITY Standard sheet size is 12 X 12 Thickness availability range is .020 - .130 (0.5mm- 3.3mm) Common standards for thickness are .020, .040 and .100 thickness (0.5mm, 1.0mm and 2.5mm) No charge samples are available in 4 X 4 size for each of the above common thicknesses PART NUMBER SYSTEM CoolZorb 400 series absorber sheets (12X12) use the following designation when ordering: CZ400-XXX where XXX is thickness of absorber in thousands of an inch CoolZorb 400 series no charge absorber samples (4X4) use the following designation when ordering: CZ400S-XXX where XXX is thickness of absorber in thousands of an inch Example: CZ400-020 = CoolZorb 400, .020X12X12 sheet size Example: CZ400S-040 = CoolZorb 400, .040X4X4 no charge sample size EMI-DS-COOLZORB PRELIM 121914 Any information furnished by Laird and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and application of Laird materials rests with the end user, since Laird and its agents cannot be aware of all potential uses. Laird makes no warranties as to the fitness, merchantability or suitability of any Laird materials or products for any specific or general uses. Laird, Laird Technologies, Inc or any of its affiliates or agents shall not be liable for incidental or consequential damages of any kind. All Laird products are sold pursuant to the Laird Technologies Terms and Conditions of sale in eect frff om time to time, a copy of which will be furnished upon request. Copyright 2014 Laird Technologies, Inc. All Rights Reserved. Laird, Laird Technologies, the Laird Logo, and other marks are trademarks or registered trademarks of Laird Technologies, Inc. or an affiliate company thereof. Other product or service names may be the property of third parties. Nothing herein provides a license under any Laird or any third party intellectual property rights.