Ships to you between Fri. 10 May to Thu. 16 May
L-154A4SUREQBFZGEW Kingbright
Display: LED; SMD; 7-segment; 14.22mm; red; 8-26mcd; anode; 0.56 Stock : 1
LED; SMD; 0602; blue; 70-150mcd; 1.6x1.2x0.6mm; 110°; 3.3÷4V; 20mA Stock : 1
LED Circuit Board Indicators Stock : 2
Display: LED; matrix; 5x7; red; 3-8mcd; anode; 39x22.9mm Stock : 1
Display Modules - LED Character and Numeric Red 7-Segment 2 Character Common Anode 1.85V 20mA 0.750" H x 0.984" W x 0.315" D (19.05mm x 25.00mm x 8.00mm) 18-DIP (0.600", 15.24mm) Stock : 0
LED Displays & Accessories Stock : 0
Standard LEDs - SMD Stock : 0
Standard LEDs - Through Hole T1 3/4 RED/GRN DIFF Stock : 0
Infrared Emitters 4x4mm RA IR SMD LED Stock : 1
CRLED; 5mm; blue; 8400mcd; 15°; Front: convex; Pitch:2.54mm Stock : 1
LED; 8mm; blue; 100-150mcd; 120°; Front: recessed; Pitch:2.54mm Stock : 1
Cree, Inc. Standard LEDs - Through Hole Amber LED Stock : 1
Lumex Standard LEDs - Through Hole LED PMI Stock : 0
Standard LEDs - Through Hole T-1 3/4 LED RED DIFF Stock : 0
Standard LEDs - Through Hole White Round Stock : 1
Standard LEDs - Through Hole Stock : 0
Standard LEDs - Through Hole LED PMI Stock : 0
LED; oval; 3.9x3.2mm; yellow; 780-1300mcd; 110/40°; Front: convex Stock : 700
T-1 3/4 (5mm) FULL COLOR LED LAMP Part Number: L-154A4SUREQBFZGEW ATTENTION OBSERVE PRECAUTIONS Hyper Red FOR HANDLING ELECTROSTATIC Blue DISCHARGE Green SENSITIVE DEVICES Features Descriptions z Uniform light output. z The Hyper Red source color devices are made with z Low power consumption. AlGaInP on GaAs substrate Light Emitting Diode. z Long life-solid state reliability. z The Blue source color devices are made with InGaN z RoHS compliant. Light Emitting Diode. z The Green source color devices are made with InGaN Light Emitting Diode. z Electrostatic discharge and power surge could damage the LEDs. z It is recommended to use a wrist band or anti- electrostatic glove when handling the LEDs. z All devices, equipments and machineries must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01 ) unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAJ9604 REV NO: Ver.8A DATE: OCT/14/2015 PAGE: 1 OF 8 APPROVED: Wynec CHECKED: Allen Liu DRAWN: F.T.Liu ERP: 1101026761 KingbrightSelection Guide Iv (mcd) 2 Viewing 20mA Angle 1 Part No. Emitting Color (Material) Lens Type Min. Typ. 21/2 400 1000 Hyper Red (AlGaInP) *120 *250 300 500 L-154A4SUREQBFZGEW White Blue (InGaN) Diffused 60 *300 *500 900 1700 Green (InGaN) *900 *1700 Notes: 1. 1 / 2 is the angle from optical centerline where the luminous intensity is 1 / 2 of the optical peak value. 2. Luminous intensity / luminous Flux: +/-15%. * Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Emitting Color Typ. Max. Units Test Conditions Hyper Red 645 peak Peak Wavelength Blue 460 nm IF=20mA Green 520 Hyper Red 630 D 1 Dominant Wavelength Blue 465 nm IF=20mA Green 525 Hyper Red 25 1/2 Spectral Line Half-width Blue 25 nm IF=20mA Green 35 Hyper Red 45 C Capacitance Blue 100 pF VF=0V f=1MHz Green 100 Hyper Red 1.9 2.5 VF 2 Forward Voltage Blue 3.3 4 V IF=20mA Green 3.2 4 Hyper Red 10 IR Reverse Current Blue 50 uA VR=5V Green 50 Notes: 1. Wavelength: + / -1nm. 2. Forward Voltage: + / -0.1V. 3. Wavelength value is traceable to the CIE127-2007 compliant national standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. Absolute Maximum Ratings at TA=25C Parameter Hyper Red Blue Green Units Power dissipation 75 120 120 mW DC Forward Current 30 30 30 mA Peak Forward Current 1 200 150 100 mA Electrostatic Discharge Threshold (HBM) 3000 250 450 V Reverse Voltage 5 V Operating/Storage Temperature -40C To +85C Lead Solder Temperature 2 260C For 3 Seconds Lead Solder Temperature 3 260C For 5 Seconds Notes: 1. 1 / 10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAJ9604 REV NO: Ver.8A DATE: OCT/14/2015 PAGE: 2 OF 8 APPROVED: Wynec CHECKED: Allen Liu DRAWN: F.T.Liu ERP: 1101026761 Kingbright