DC10GWA

10 SEGMENT BAR GRAPH ARRAY Part Number: DC10GWA Green Features Description z Suitable for level indicators. The Green source color devices are made with Gallium z Low current operation. Phosphide Green Light Emitting Diode. z Excellent on/off contrast. z End stackable. z Mechanically rugged. z Standard : gray face, white segment. z RoHS compliant. Package Dimensions& Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is 0.25(0.01 )unless otherwise noted. 2. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAD1429 REV NO: V.9A DATE: NOV/18/2013 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.Liu ERP: 1331000017 Selection Guide Iv (ucd) 1 10mA Part No. Dice Lens Type Description Min. Typ. 5600 12000 10 Segments DC10GWA Green (GaP) White Diffused Bar graph-Display *1400 *4000 Note: 1. Luminous intensity/ luminous Flux: +/-15%. *Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. Max. Units Test Conditions peak Peak Wavelength Green 565 nm IF=20mA D 1 Dominant Wavelength Green 568 nm IF=20mA 1/2 Spectral Line Half-width Green 30 nm IF=20mA C Capacitance Green 15 pF VF=0V f=1MHz VF 2 Forward Voltage Green 2.2 2.5 V IF=20mA IR Reverse Current Green 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25C Parameter Green Units Power dissipation 62.5 mW DC Forward Current 25 mA Peak Forward Current 1 140 mA Reverse Voltage 5 V Operating / Storage Temperature -40C To +85C Lead Solder Temperature 2 260C For 3-5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. SPEC NO: DSAD1429 REV NO: V.9A DATE: NOV/18/2013 PAGE: 2 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.Liu ERP: 1331000017