iglidur Tribo-Filament Advantages iglidur Tribo-Filament Technical data Print your own real iglidur products Material properties table Standard material: iglidur Tribo-Filament General properties Unit iglidur I180-PF iglidur I170-PF Testing method iglidur I180-PF 3 Density g/cm 1.21 1.21 Page 588 for 3D printing Wear Colour white yellow Max. moisture absorption at +23 C/50 % r.h. % weight 0.3 0.5 DIN 53495 resistant Max. water absorption % weight 0.9 1.6 Nozzle temperature: Mechanical properties +220C to +250C The materials that have been specially developed Modulus of elasticity MPa 1,000 1,000 DIN 53457 for 3D printing are up to 50 times more abrasion- Tensile strength at +20 C MPa 44 33 DIN 53452 resistant than conventional 3D print materials. Also suited for Max. recommended surface pressure (+20 C) MPa n.b. n.b. This provides a new degree of freedom when tight feed radii Shore-D hardness 66 64 DIN 53505 designing gliding components subject to wear: Physical and thermal properties custom parts and prototypes from a 3D printer Max. long term application temperature C +80 +75 with a tested service life. Max. short term application temperature C +90 +85 Min. application temperature C 40 40 Wear-resistant Electrical properties Suitable for commercially available 3D printers 12 12 Specic volume resistance cm > 10 > 10 DIN IEC 93 using FDM process 11 11 Surface resistance > 10 > 10 DIN 53482 1.75 mm and 3 mm thickness Table 01: Material properties table Typical industries and applications Highest wear resistance: Prototype constructions Small batches 400 400 iglidur I170-PF Construction tests, etc. 350 350 Page 588 300 300 250 250 More information about 3D printing 200 200 Nozzle temperature: www.igus.eu/3D-printer +220C to +250C 150 150 Depending on material: 100 100 iglidur I170-PF: 40 C up to +75 C 50 50 Large iglidur I180-PF: 40 C up to +80 C 0 0 feed radii (min. 50 mm) Cf53 304 SS Cf53 304 SS 2 Materials Wear pivoting: v = 0.01 m/s p = 1 MPa = 60 Wear linear: v = 0.1 m/s p = 1 MPa l = 5 mm 1.75 mm and 3 mm (for iglidur I180-PF) Available from stock Detailed information about delivery time online. Wear The iglidur Tribo-Filaments are up to 50 times more wear Detailed information about processing resistant than conventional materials (PLA/ABS) for 3D prin- instructions ting. The highest level of Tribo-Filament wear resistance is www.igus.eu/tribolament achieved with iglidur I170-PF and is very similar to that of injection moulded bearings under low to medium loads. Even the wear rate of iglidur l180-PF components is far superior to that of conventional 3D printing materials. They are also easier to process than iglidur l170-PF. 586 Processing instructions and more information www.igus.eu/tribolament 3D-CAD les, prices and delivery time www.igus.eu/tribolament 587 Wear rate m/km PLA ABS PC-ABS PC iglidur I170-PF iglidur I180-PF iglidur J (moulded) Wear rate m/km PLA ABS PC-ABS PC iglidur I170-PF iglidur I180-PF iglidur J (moulded) iglidur iglidur Tribo- Tribo- iglidur Tribo-Filament Product range My sketches Filament Filament Order key Tribo-Filament Diameter Weight iglidur I180 iglidur I170 iglidur I180 Flexible iglidur I170 Highest wear resistance Nozzle temperature: +220 C up to +250 C Nozzle temperature: +220 C up to +250 C Print bed temperature: +90 C up to +110 C Print bed temperature: +90 C up to +110 C Suited for tight feed radii Large material feed radii (R min. 50 mm) Filament on a spool part no. Filament on a spool part no. I180-PF-0175-0250 I170-PF-0175-0250 I180-PF-0300-0250 I170-PF-0300-0750 I180-PF-0300-0750 Test kit part no. Test kit part no. I170-PF-0175-0025 I180-PF-0175-0025 I180-PF-0300-0025 Good ventilation should be provided during Complete processing instructions online processing When heated above +300 C, hazardous fumes are produced Processing instructions Spool iglidur Tribo-Filaments can be processed on any 3D prin- iglidur Tribo-Filaments weighing 250 g are wound onto a ter that is equipped with a heated print bed on which tem- spool with an outer diameter of 105 mm, a width of 55 mm. peratures are adjustable. The same method to adhere ABS The inner diameter is 55 mm. laments to the printer bed can then also be used for iglidur Test kits with 25 g lament are also available this is not laments. Examples: glass taped with blue tape or kapton wound onto a spool. tape at a print bed temperature of +90 C up to +110 C. iglidur I170-PF is harder to process than iglidur I180-PF. The complete processing instructions are available online www.igus.eu/tribolament 588 Processing instructions and more information www.igus.eu/tribolament 3D-CAD les, prices and delivery time www.igus.eu/tribolament 589 iglidur material Tribo-Filament mm 100 Spool weight g