Stainless Steel Pressure Sensors XPRO Series FEATURES Sealed, rugged package well suited for industrial environments 1.0% accuracy for secondary process measurements Stainless steel for corrosion resistance I/S certified when used with approved barriers - Class 1, Division 1, Groups A through G TYPICAL APPLICATIONS Freon and ammonia refrigeration Process control Flow detection The XPRO industrial grade pressure transmitter provides instrument Pneumatic systems engineers and OEM designers with reliable and affordable measurements. Water resource The 4 mA to 20 mA output signal is well suited for long cable runs in management electrically noisy environments. Liquid level The XPROs silicon strain gages are mounted on a beam coupled to a 300 measurement series stainless steel diaphragm for maximum isolation from thermal transients. The pressure cavity is a brazed assembly of 300 series stainless steels with no elastomer seals or adhesive bonds to corrode or deteriorate. The sensing element and internal electronics are protected from normal industrial environments by a sealed stainless steel case. WARNING PERSONAL INJURY DO NOT USE these products as safety or emergency stop devices or WARNING in any other application MISUSE OF DOCUMENTATION where failure of the product The information presented in this product sheet is for reference only. could result in personal injury. Do not use this document as a product installation guide. Failure to comply with Complete installation, operation, and maintenance information is these instructions could provided in the instructions supplied with each product. result in death or serious Failure to comply with these instructions could result in death or injury. serious injury. Sensing and Control Stainless Steel Pressure Sensors XPRO Series SPECIFICATIONS Pressure Ranges 0 to15, 25 and 50, psig 0 to 500,1000, 3,000 and 5,000 psis 2 0 to 100 and 200 psis 0 to 100 and 350 kg/cm Physical Proof Pressure 2 X rated range 1. 5 X rated range Burst Pressure 10 X rated range 5 X rated range Material in contact with media Brazed assembly of 300 series Stainless Steel Shock Resistance 50 g peak 5 milliseconds Vibration Resistance Meets MIL-STD 810C, Fig. 514-4, Curve AK, Time Schedule II, Random Vibration Test Overall g rms = 20.7 minimum Weight Less than 3.0 oz 85.0 gm without cable Electrical Span 16 0.32 mA into 0 to1400 loop resistance at 25 C 77 F Excitation Voltage 12.0 Vdc to 40.0 Vdc linear derating to 35.0 Vdc from 25 C to 100 C 77 F to 212 F Null Offset 4 0.4 mA at 25 C 77 F Reverse Polarity Protection Yes Insulation Resistance Greater than 100 megohms at 250 Vdc Electrical Connection 2-conductor, 22 AWG, color coded shielded cable 0.91 m 3 ft long Performance Accuracy 0.5% span from best fit straight line including effects of non-linearity, hysteresis, repeatability, 1.0% FSO 0 to 15 and 25 psi Operating Temperature Range -40 C to 100 C -40 F to 212 F Compensated Temperature -1 C to 54 C 30 F to 130 F Range Thermal Effect on Zero Less than 1% span within the compensated temperature range Thermal Effect on Span Less than 1% within the compensated temperature range Note: All specifications are measured at 25 C 77 F and at rated excitation unless otherwise specified. Honeywell Sensing and Control 2