NC-OO 0.89MM 30M

Material Safety Data Sheet Revision Date: 12/07/2006 Issue date: 05/10/2006 Version: 1 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION Product name: NC-AA NC-AB NC-BB NC-MW NC-OO Item No. : MBWICK Product type: No Clean Desoldering Wick Region: Europe Company Name & Address Henkel Loctite Adhesives Ltd. Multicore Solders Technologies House, Wood Lane End Hemel Hempstead, Herts HP2 4RQ, UK Tel: +44 (0) 1442 278000 Fax: +44 (0) 1442 278071 Emergency Tel: +44 (0) 1442 278000 2. COMPOSITION/INFORMATION ON INGREDIENTS Hazardous components EINECS-No. % Classification CAS No. Copper 231-159-6 80 - 100 7440-50-8 Additional Information: For the explanation of the listed risk phrases refer to Section 16. 3. HAZARDS IDENTIFICATION This product contains modified rosin. Flux fumes emitted during reflow will irritate the nose and throat and may cause an asthmatic type reaction. 4. FIRST AID MEASURES Inhalation: Move to fresh air. If symptoms persist, seek medical advice. Eye contact: Flush eyes with plenty of water for at least 15 minutes. If irritation persists seek medical attention. Ingestion: Do not induce vomiting. Seek medical attention immediately. Skin contact: Wash off with soap and plenty of water. Obtain medical attention if irritation persists. 5. FIRE-FIGHTING MEASURES Extinguishing media: The product itself does not burn. Use extinguishing meaures appropriate to local circumstances and the surrounding environment. Item No. : MBWICK Product name: NC-AA NC-AB NC-BB NC-MW NC-OO 1 of 5 Special fire fighting procedures: Fire fighters should wear positive pressure breathing apparatus. Do not use water on fires where molten metal is present. Unusual fire or explosion hazards: None. Hazardous combustion products: High temperatures may produce heavy metal dust, fumes or vapours. The flux will give rise to irritating fumes. 6. ACCIDENTAL RELEASE MEASURES Environmental precautions: Do not allow material to contaminate ground water system. Clean-up methods: Scrape up. 7. HANDLING AND STORAGE Handling: Use only in area provided with appropriate exhaust ventilation. Do not eat, drink or smoke when handling. Wash hands before breaks and immediately after handling the product. Storage: Store in a cool, dry place. Keep out of reach of children. 8. EXPOSURE CONTROLS / PERSONAL PROTECTION Hazardous components ACGIH TLV Austria Belgium Czech CAS No. 3 3 Copper 0.2 mg/m TWA 0.1 mg/m MAK 0.2 mg/m VLE 0.1 mg/m TWA 3 3 7440-50-8 1 mg/m TWA 0.1 mg/m MAK 1 mg/m VLE 1 mg/m TWA 0.4 mg/m STEL 1 mg/m MAK 4 mg/m STEL Hazardous components Estonia Greece Finland France Hungary CAS No. 3 3 3 Copper 0.2 mg/m TWA 2 mg/m STEL 0.1 mg/m TWA 0.2 mg/m VME 4 mg/m STEL 3 3 3 7440-50-8 1 mg/m TWA 1 mg/m TWA 1 mg/m TWA 1 mg/m VME 0.4 mg/m STEL 3 3 3 0.2 mg/m TWA 0.2 mg/m TWA 1 mg/m TWA 2 mg/m VLE 1 mg/m TWA 3 0.1 mg/m TWA Hazardous components Germany Ireland Netherlands Norway Portugal CAS No. Copper 0.1 mg/m MAK 0.2 mg/m TWA 0.2 mg/m MAC 0.1 mg/m TWA 0.2 mg/m TWA 7440-50-8 0.2 mg/m Peak 1 mg/m TWA 1 mg/m MAC 1 mg/m TWA 1 mg/m TWA 2 mg/m STEL Hazardous components Poland Spain Sweden UK EH40 CAS No. 3 Copper 0.2 mg/m VLA-ED 0.2 mg/m LLV 0.2 mg/m TWA 3 7440-50-8 1 mg/m VLA-ED 1 mg/m LLV 1 mg/m TWA 3 0.6 mg/m STEL 3 2 mg/m STEL Modified rosin Rosin flux fume: 0.05 mg/m MEL TWA (As total resin acids) 0.15 mg/m MEL STEL (As total resin acids) Engineering controls: Extraction is necessary to remove fumes evolved during reflow. Where reasonably practicable this should be achieved by the use of local exhaust ventilation and good general extraction. Respiratory protection: In case of insufficient ventilation, wear suitable respiratory equipment. Skin protection: No special protective equipment required. Item No. : MBWICK Product name: NC-AA NC-AB NC-BB NC-MW NC-OO 2 of 5