PRODUCT SPECIFICATION 1 (3) Prepared (also subject responsible if other) No. JIDLZHAO 1/1301- BMR 637 03 Uen Technical Specication Approved Checked Date Rev Reference EN/LZT 146 397 R3A Oct. 2017 PKM 4118LC PINB Direct Converters 2017-10-27 B Flex Input 36-75 V, Output up to 100 A / 180 W Key Features Industry standard quarter-brick and optional double Pin- Out. 57.9 x 36.8 x 9.35 mm (2.28 x 1.45 x 0.368 in.) High efficiency, typ. 91.5 % at 1.8 Vout half load 2250 Vdc input to output isolation Meets isolation requirements equivalent to basic insulation according to IEC/EN/UL 60950 More than 2.7 million hours MTBF General Characteristics Over temperature protection Over current limit protection Over voltage protection Remote control Output voltage adjust function Highly automated manufacturing ensures quality ISO 9001/14001 certified supplier Safety Approvals Design for Environment Meets requirements in high- temperature lead-free soldering processes. Contents Ordering Information .............................................................. 2 General Information .............................................................. 2 Safety Specification .............................................................. 3 Absolute Maximum Ratings .............................................................. 4 Electrical Specification 1.2V, 100A / 120W PKM 4118LC PINB ............................... 5 EMC Specification .............................................................. 9 Operating Information ............................................................ 10 Thermal Consideration ............................................................ 11 Connections ............................................................ 13 Mechanical Information ............................................................ 14 Soldering Information ............................................................ 18 Delivery Information ............................................................ 18 Product Qualification Specification ............................................................ 19 PRODUCT SPECIFICATION 2 (3) Prepared (also subject responsible if other) No. JIDLZHAO 1/1301- BMR 637 03 Uen 2 Technical Specication Approved Checked Date Rev Reference EN/LZT 146 397 R3A Oct. 2017 PKM 4118LC PINB Direct Converters 2017-10-27 B Flex Input 36-75 V, Output up to 100 A / 180 W Ordering Information to communicate information on substances in the products. See Contents for individual product ordering numbers. Quality Statement Option Suffix Ordering No. The products are designed and manufactured in an Baseplate PKM 4118LC PI industrial environment where quality systems and methods Positive Remote Control Logic P PKM 4118LC PIPNB like ISO 9000, Six Sigma, and SPC are intensively in use to Increased stand-off height M PKM 4118LC PINBM boost the continuous improvements strategy. Infant Lead length 3.69 mm (0.145 in) LA PKM 4118LC PINBLA mortality or early failures in the products are screened out Lead length 4.57 mm (0.180 in) LB PKM 4118LC PINBLB and they are subjected to an ATE-based final test. Note: As an example a positive logic, increased standoff, short pin product would be PKM 4118LC PIPNBMLA. Conservative design rules, design reviews and product qualifications, plus the high competence of an engaged General Information work force, contribute to the high quality of the products. Reliability Warranty The Mean Time Between Failure (MTBF) is calculated at full Warranty period and conditions are defined in Flex Power output power and an operating ambient temperature (TA) of General Terms and Conditions of Sale. +40C, which is a typical condition in Information and Communication Technology (ICT) equipment. Different Limitation of Liability methods could be used to calculate the predicted MTBF and failure rate which may give different results. Flex currently Flex Power does not make any other warranties, expressed uses two different methods, Flex failure rate data system or implied including any warranty of merchantability or DependTool and Telcordia SR332. fitness for a particular purpose (including, but not limited to, use in life support applications, where malfunctions of Predicted MTBF for the series is: product can cause injury to a persons health or life). - 2.7 million hours according to DependTool. - 1.4 million hours according to Telcordia SR332, issue 1, Black box technique. Flex 2017 The information and specifications in this technical The Flex failure rate data system is based on field tracking specification is believed to be correct at the time of data. The data corresponds to actual failure rates of publication. However, no liability is accepted for components used in ICT equipment in temperature controlled inaccuracies, printing errors or for any consequences environments (T = -5...+65C). A thereof. Flex Power reserves the right to change the Telcordia SR332 is a commonly used standard method contents of this technical specification at any time without intended for reliability calculations in ICT equipment. The prior notice. parts count procedure used in this method was originally modelled on the methods from MIL-HDBK-217F, Reliability Predictions of Electronic Equipment. It assumes that no reliability data is available on the actual units and devices for which the predictions are to be made, i.e. all predictions are based on generic reliability parameters. Compatibility with RoHS requirements The products are compatible with the relevant clauses and requirements of the RoHS directive 2011/65/EU and have a maximum concentration value of 0.1% by weight in homogeneous materials for lead, mercury, hexavalent chromium, PBB and PBDE and of 0.01% by weight in homogeneous materials for cadmium. Exemptions in the RoHS directive utilized in Flex Power products are found in the Statement of Compliance document. Flex Power fulfills and will continuously fulfill all its obligations under regulation (EC) No 1907/2006 concerning the registration, evaluation, authorization and restriction of chemicals (REACH) as they enter into force and is through product materials declarations preparing for the obligations