9004/MK/6/6/TERM/ECP/2PL

Certificate No. 930015 Tat Bank Road, Oldbury , W est Midlands B69 4NP Telephone: 0121 541 1315 Fax: 0121 552 0592 E-mail: sales feel.uk.net W ebsite: www.feel.uk.net RANGE 9000 EXPLOSION PROTECTED / WEATHERPROOF / JUNCTION BOX Sira certified under directive 94/9/EC (ATEX) for Group II, Category 2, G and D. The enclosure has been certified to give a large measure of flexibility based on Power Dissipation and is suitable for Zone 1, 2 (Gases) Zone 21 and 22 (Dusts). Product complies with standards EN 50014, EN 50019 and EN 50281-1-1 CERTIFICATE NUMBER: Sira 02ATEX3111 O PROTECTION CONCEPT: EEx e II T6 T85 C O EEx e II T5 T100 C O EEx e II T3 T150 C O O AMBIENT TEMPERATURE: -40 C to +50 C (T6) O O -40 C to +55 C (T5) O O -40 C to +130 C (T3) POWER DISSIPATION LIMIT: 7.2W INGRESS PROTECTION: IP66 MATERIALS STANDARD: Glass Reinforced Polyester, Fire Retardant. O SPECIAL: Forton PPS for 130 C ambient, when fitted with ceramic terminals. COVER SCREWS: Stainless Steelcaptive - the enclosure has a uniquely designed hinged cover which allows the unit to remain as oneat the time of installation. EARTHING FACILITIES: Supplied as an optional extra: 1. Earth continuity Plate. 2. internal / External Earth Stud. FINISH STANDARD: Matt Black. WEIGHT: 0.6Kg (approx) CABLE ENTRIES: Standard entries are 20mm and 25mm ISO metric. 1.5mm pitch. Alternative entries are available 1 3 3 upon request. NPT / and /. Pg 11, 13.5, 16 and 21. BS conduit / and 1 . 2 4 4 or plan clearance holes. Entry Position 20mm 25mm West 9051 1 Way 9001 West and East 9052 2 Way 9002 3 Way West, East and South 9003 9053 West, East, South and North 9054 4 Way 9004 West and South 9055 Angle 9005 TERMINALBLOCKS: Various terminal blocks may be fitted to the enclosure the table opposite is a guide to ratings that can be obtained using various terminal combinations. The table assumes that each terminal is carrying the same level of current for further information please call FEELtechnical personnel. 27Maximum Conductor Size Load per Terminal Load per Terminal Load per Terminal Terminal Form Terminal Voltage 2 No of Ways (mm ) (T6) (T5) (T3) Block 6 4.0 28.0 28.0 N/A 275 Block 6 6.0 26.0 26.0 N/A 420 550 Rail mounted 10 2.5 21.0 21.0 N/A Rail mounted 8 4.0 28.0 28.0 N/A 550 Rail mounted 6 6.0 36.0 36.0 N/A 550 550 Rail mounted 4 10.0 50.0 50.0 N/A Rail mounted (ceramic) 7 4.0 N/A N/A 21.0 275 Rail mounted (ceramic) 4 10.0 N/A N/A 37.0 275 IMPORTANT In order to comply with certification requirements it is necessary to supply each enclosure fitted with a terminal block. Please detail your exact requirements. If terminal blocks are not defined each enclosure will be fitted with a 4-way block suitable for 2 4.0mm conductors 28 Amps. Entry to enclosure must be by way of approved cable glands and unused entries must be fitted with approved plugs. INSTALLATION INSTRUCTIONS: The installer must ensure that the enclosure chosen is suitable for the field of application. Which means that the marking on the certification label must correspond to the classification given to the Ex area. Also that the temperature class of the enclosure meets the respective requirements. For further information refer to the Installation Instruction sheet provided with the enclosures. THE RIGHT CHOICE FOR QUALITY AND SERVICE 28