1001518

Static Shielding Bag 1000 Series This transparent metal-in static shielding bag is designed to provide a Meets ANSI/ESD S20.20, Packaging standard ANSI/ESD S541, and static safe environment for ESD sensitive electronic devices. Bags are Static Control Bag ANSI/ESD S11.4 Level 3 printed with an ESD protective symbol and a lot code for traceability. Open top (1000 Series) and ZipTop (3000 Series) styles are available. Physical Typical Value Testing Method The bags are heat sealable. Tensile Strength 4600 PSI, 32 MPa ASTM D882 SCS Static Shielding Bags 1000 Series are manufactured from a polyester, metal, polyethylene laminate. The polyester dielectric in Puncture Resistance 12 lbs, 53 N MIL-STD-3010C Method concert with the metal layer provides discharge shielding. The exterior 2065 being static dissipative allows electrostatic charges to be removed Seal Strength 11 lbs, 48 N ASTM D882 when grounded. Open Top Bag ZipTop Bag Open Top Bag ZipTop Bag Thickness 2.8 mils, 0.071 mm +/-10% MIL-STD-3010C Method 1003 Marking Adhesion Pass IPC-TM-650 2.4.1 Transparency 40% Tobias Static Shielding Bag Static Shielding Bag Electrical Typical Value Testing Method 1000 1000 Discharge Shielding Discharge Shielding ESD Shielding <10 nJ ANSI/ESD STM11.31 ATTENTION: ATTENTION: 7 11 Contents may be Static Sensitive 7 11 Contents may be Static Sensitive 4 11 Handling Precautions Required Handling Precautions Required OTHER PET/ALU/PE OTHER PET/ALU/PE Surface Resistance - 1 x 10 to < 1 x 10 ohms ANSI/ESD STM11.11 Interior LOT 13910987654321 LOT 13910987654321 11 Surface Resistance - < 1 x 10 ohms ANSI/ESD STM11.11 Exterior Static Decay < 2 seconds ETS 406D Tolerance: Width -0, +1/4 Length +/- 1/8 Offset 0 to 1/4 Note: Standard bag markings shown Cleanliness Typical Value Testing Method Tolerance (inches): Width -0, +0.250 Length +/- 0.125 Offset O to 0.250 above and are not to scale. Seal width 3/8 with a tolerance of +/- 1/8 Seal width +/- 0.125 ** Bags are printed (hot stamp or thermal) with an ESD Silicone Not Detected FTIR protective symbol and a lot code for traceability. ** Heat Sealing Conditions Typical Value Temperature 300F 375F, 149C 190C Time 0.5 3.5 seconds Pressure 30 70 PSI, 206 482 KPa Bag is free of amines, silicones and heavy metals. This product is intended for commercial use only. This product is not on the Qualified Product Listing under the Defense Standardization Program. RoHS, REACH and Conflict Minerals, Statement See the SCS RoHS, REACH, and Conflict Minerals Statement: X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Antistatic Control Products category: Click to view products by Desco manufacturer: Other Similar products are found below : 13020 13490 13870 13879 13881 13883 13882 14404 2202SP 3039 37061 42470 09060 09857 42516 37059 04563 17252 19691 19695 09037 09826 09813 66070 100816 68101 68103 98132 73741 13868 13485 13457 13245 13468 13420 13332 13205 13135 91070 8031 8523 66085 40931 37081 13080 13215 13806 73749 010-0225 17260