TLU-115

P BASED SENSORS WITH LED EMISSION Teach-in, Remote setting and models with Auto-Set Red/green or white LED emission Various interchangeable lenses and fibre-optic versions Metal housing with orientable optics and connector TL SERIES The TL series offers the most reliable and innovative solutions for all detection applications of register marks and other neutral or coloured references. The microprocessor-based setting can be either Teach-in using two push-buttons or Remote by cable with the possibility of rapidly memorising and recalling 4 different formats. The setting can also be dynamic and completely automatic in the models with the Auto-Set function. The LED emission can be red/green with automatic selection, or white offering the possibility of operating on all contrasts, also amongst same-coloured objects and backgrounds, presenting different surface treatments or workings. Models with interchangeable 9 mm or 18 mm lenses are available 22, 28 and 50 mm lenses are supplied as accessories. Moreover many different fibre-optic models are available. The output is NPN or PNP according to the model, but is always selectable by means of an internal switch an analog output proportional to the received light is also present. CONTRAST SENSORSTECHNICAL DATA DETECTION DIAGRAMS Power supply: ............................................... 10 ... 30 Vdc, reverse polarity protection Consumption: ............................................... 80 mA max. Light emission: ............................................. red 630 nm / green 526 nm LED white LED (TL-4/5xx vers.) Spot dimension: ........................................... 1.5 x 5 mm (9 mm lens) 3 mm (9 lens - circular) 9 mm lens 2 x 7 mm (18 mm lens) Operating distance: ...................................... 6 ... 12 mm (9 mm lens) 14 ... 22 mm (18 mm lens) 22 ... 34 mm (28 mm lens) 40 ... 60 mm (50 mm lens) Operating distance with fibre-optics: ......... 0 ... 3 mm proximity 0 ... 10 mm through beam 18 mm lens Depth of field: ............................................... 3 mm (9 mm lens) 4 mm (18 mm lens) 6 mm (28 mm lens) 10 mm (50 mm lens) Setting: .......................................................... Teach-in with 2 push-buttons Remote with 2 wires dynamic Auto-Set (vers.TL-417/517) 22 mm lens Indicators: ..................................................... red OUTPUT LED green POWER LED (vers.TL-417/517) green READY LED Output type: .................................................. NPN or PNP, Rpull-down/up 10 k Saturation voltage: ....................................... 1 V max. (NPN vers.) 2 V max. (PNP vers.) Output current: ............................................. 200 mA max., short-circuit protection 28 mm lens Response time: .............................................50 s max., 25 s max. (TL-4/5xx vers.) Switching frequency: ................................... 10 kHz max., 20 kHz max. (TL-4/5xx vers.) Operating mode: .......................................... automatic dark/light selection Analog output range: ................................... 0 ... 5.5 Vdc (2 Vdc on white 90%) 2.2 k output resistance Timing function: ........................................... 20 ms minimum output ON Connection: .................................................. M12 4-pole connector 50 mm lens 3m 6.1 mm shielded cable Electrical protection: ....................................class 1 Mechanical protection: ................................ IP67 Housing material: ......................................... ZAMA Lens material: ............................................... glass Fibre-optic material: ..................................... fibre in glass / sheath in metal fibre in PMMA / sheath in PE (OF-30) Proximity fibre-optics Weight: .......................................................... 310 g max. (connector vers.) 450 g max. (cable vers.) Operating temperature: ............................... -10 ... +55C Storage temperature: ................................... -25 ... +70C Fibre operating temperature: ...................... -30 ... +150C (glass OF vers.) -30 ... +60C (OF-30) Reference standard: ..................................... EN 60947-5-2 Through beam fibre-optics Certifications: ............................................... II3D The detection diagrams indicate the typical The operating distances indicate the typical detection distance. operating distance. UNI EN ISO9001 UNI EN ISO14000