PEC1600-12-074xA is a 1600 Watt, CRPS AC to DC power supply module with a +12 V main DC output and a +12 V standby output. The power supply operates as a single supply, or N+1 parallel configuration. PEC1600-12-074xA utilizes full digital control architecture for greater efficiency, control and functionality. This power supply meets international safety standards and displays the CE-Mark for the European Low Voltage Directive (LVD). 80 PLUS Platinum Efficiency Input Voltage Range 90 264 VAC / 180 300 VDC Output Voltage 12 VDC +12 VSB (2.1 A) Standby Output Output Power up to 1600 W Intel Standard CRPS Form Factor Dimensions: 185 x 73.5 x 40 mm (7.28 x 2.89 x 1.57 in) High Power Density UL/CSA 62368-1, EN/IEC 62368-1 Safety Approved Supports N+1 Redundancy, Cold Redundancy, Internal ORing Black Box Recorder, Bootloader Clockwise and Counter-Clockwise Fan Rotation Supports Power Management Bus Communication Protocol Networking Switches Servers & Routers Telecommunications 2 PEC1600-12-074xA 1. PEC 1600 - 12 - 074 x A Product Family Power Level Dash V1 Output Dash Width Airflow Input N: Normal PEC Front-Ends 1600 W 12 V 73.5 mm A: AC R: Reverse 2. PARAMETER DESCRIPTION / CONDITION MIN NOM MAX UNIT Low Voltage AC Range (1000 W) 90 100-127 140 V RMS Start-up 85 5 VAC Power Off 75 5 VAC Input Voltage Ranges* Only High Voltage AC Range (1600 W) 180 200-240 264 V RMS HVDC (240 V) 180 240 300 VDC Start-up 170 5 VDC Power Off 160 5 VDC AC Line Inrush Current 50 Ap Input Frequency 47 50/60 63 Hz 230 VAC/50 Hz and 115 VAC/60 Hz, 10% load 0.85 230 VAC/50 Hz and 115 VAC/60 Hz, 20% load 0.95 Power Factor 230 VAC/50 Hz and 115 VAC/60 Hz, 50% load 0.96 230 VAC/50 Hz and 115 VAC/60 Hz, 100% load 0.98 200 VAC / 230 VAC & 50 Hz / 60 Hz, Output power 10% 20 200 VAC / 230 VAC & 50 Hz / 60 Hz, Output power >20% & <30% 15 Current iTHD (Total Harmonic 200 VAC / 230 VAC & 50 Hz / 60 Hz, Output power 30% 10 % Distortion) 200 VAC / 230 VAC & 50 Hz / 60 Hz, Output power 50% 8 200 VAC / 230 VAC & 50 Hz / 60 Hz, Output power 100% 5 10% load (230 VAC / 60 Hz) 85 % 20% load (230 VAC / 60 Hz) 90 % Efficiency 50% load (230 VAC / 60 Hz) 94 % 100% load (230 VAC / 60 Hz) 91 % Hold-up Time 70% of max. loading 10 ms 12VSB Hold-up Time 100% load 70 ms 0 to 1/2 AC cycle (nom AC voltage ranges, 50/60 Hz) 95 AC Line Sag % > 1 AC cycle (nom AC voltage ranges, 50/60 Hz) 30 Continuous (nom AC voltage ranges, 50/60 Hz) 10 AC Line Surge % 0 to 1/2 AC cycle (mid-point of nom VAC ranges, 50/60 Hz) 30 3000 VAC AC Line Isolation Primary to secondary reinforced insulation (IEC 60950) 4242 VDC * Note: The Brown IN/OUT Hysteresis min is 5 VAC. 1. Maximum input current at low input voltage range is measured at 90 VAC, at max load (13.8 Arms) 2. Maximum input current at high input voltage range is measured at 200 VAC, at max load (9.6 Arms) 3. 9.6 Arms maximum while input voltage is 180 VDC.at max load 4. AC Brown-in/out loading is 80%load (low line & high line) 2.1 AC INPUT CONNECTOR The AC input connector is an IEC 320 C-14 power inlet. This inlet is rated for 10 A / 250 VAC. tech.support psbel.com