SR30500410

SmartFlex SR305 FLEXIBLE, ADAPTABLE LTE ROUTER + Powerful CPU and enhanced memory + Extended operational temperature range from -40 C to +75 C + 10-60 VDC operation with transient and reverse polarity voltage protection + Flexible port options 3-port Switch, Ethernet and RS-232/422/485 serial ports with isolation + GPS and GLONASS support + MicroSD card holder, In/Out, USB Host + Low power consumption mode for solar and battery power applications + Optional industrial grade Wi-Fi + Optional PoE PSE or PoE PD on ETH0 and ETH1 + Advanced security features TM SmartFlex Family SmartFlex cellular router provides secure Internet 2x ETH, 1x USB, 2x BI, 1x BO, MicroSD reader, 2x SIM reader connectivity for devices and LANs via the cellular networks. It canprovide automatic wireless failover for wired networks, BB - SR305 XXXXX - YYYY wireless connectivity for devices in remote locations where No SmartWorx HUB cable connections are impractical and wireless connectivity SWH SmartWorx HUB for mobile assets. With upload speeds of up to 50 Mbps and download speeds of up to 100 Mbps, SmartFlex provides Accessories ample bandwidth, even for applications that require video. 0 No Accessories (DIN holder included) SmartFlex places intelligence at the network edge with an Enclosure extremely powerful Cortex A8 CPU at 1GHz, 256 MB flash 1 Plastic enclosure memory, 512 MB RAM and 128kB M-RAM, providing full 2 Metal enclosure support for LTE (Long Term Evolution) speeds and applications. A secure Web interface allows users to configure and manage Interfaces SmartFlex from remote locations. The router can also upgrade 0 No optional port its configuration and firmware from the operators central 1 3x ETH Switch server, allowing for simultaneous mass reconfiguration of 3 RS232 (5-pin TB), RS485/422 (4-pin TB) every router on the network. Users may insert Linux scripts 4 RS232 (4-pin TB), RS485 (3-pin TB), ETH and can create multiple configurations for the same router PoE and switch from one configuration to another at any time. 0 No PoE Modular SmartFlex can be configured for any application. 8 PoE PSE Standard configuration includes 2 Ethernet ports with 9 PoE PD 2 independent LANs/IP addresses and also includes 1 USB host port, 1 microSD card holder, 2 SIM card holders WiFi for automatic failover to an alternate service provider, 2 0 No Wi binary inputs(I/O), 1 binary output (I/O) and onboard GPS. 1 WiFi (TI 2.4 & 5 GHz) An optional built-in Wi-Fi module is also available, with Router version industrial grade operating temperature ranges from -40 to 05 NAM +75 C (-20 to +60 C LTE450 module). Further optional boards include: 3x ETH (the router can be configured with up to 5 total Ethernet ports and 3 independent LANs/IP addresses) or ETH/ RS-232/485 or RS-232/485 (isolation strength up to 2.5kV) or RS-232. The SmartFlex supports real time data encryption and the creation of VPN tunnels using IPsec, OpenVPN and L2TP. ORDERING INFORMATION It supports DHCP, NAT, NAT-T, DynDNS, NTP, VRRP, control Note: Check with your local distributor for availability, options, and HW configuration. by SMS, and numerous other functions, as well as additional Contact Advantech B+B SmartWorx distributors. software like SmartCluster VPN Server and R-SeeNet. Note: Antennas & Power Supply Sold Separately. All product specifications are subject to change without notice. www.advantech-bb.com / Enabling an Intelligent Planet SmartFlex SR305 September 5, 2019 8:54 AMSmartFlex SR305 FLEXIBLE, ADAPTABLE LTE ROUTER HW SPECIFICATIONS PORTS, LED, ANTENNAS 3-port SWITCH ETH - RS232 - RS485 Up to 5x ETH ports RJ45, 10/100 Mbps SIM 2 Mini SIMs (2FF) (rear panel) PWR, DAT, WAN, ETH, SIM, USR, POE, IN0, LED Indicators IN1, OUT 3x ANT - ANT, DIV, GPS SMA connectors (sold separately) Wi-Fi Antenna (sold separately) R-SMA connector USB USB Host connector 2.0 SD Card 1x Micro SD Card slot (rear panel) RS232 - RS485 RST RESET button (rear panel) *Optional 3-port SWITCH 3x RJ45, 10/100 Mbps RJ45, 4-pin terminal block, 3-pin terminal block *Optional ETH - R232 - RS485 connectors Isolation up to 2.5 kV 5-pin terminal block, 4-pin terminal block *Optional RS232 - RS485 connectors Isolation up to 2.5 kV POWER WI-FI - 802.11 A/B/G/N, AP OR CLIENT MODES Power Supply Supported Wi-Fi 10 60 VDC (2Way Molex connector 2.4 GHz, 5 GHz (sold separately) band Idle: 2.5 W Encryption None, WEP, TKIP, AES Average: 4 W Power Consumption 5 GHz supported Peak: 11 W 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165 channels Sleep Mode: 10mW 2.4 GHz supported 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14 ENVIRONMENTAL channels Operating: -40 to +75 C Temperature Range Number of clients 10 Storage: -40 to +85 C Authentication Open, Shared, WPAPSK, WPA2PSK Temperature Range Operating: -20 to +60 C LTE450 Storage: -40 to +85 C POE POE PD P0E PSE Operating: 0 to 95 % Humidity PARAMETERS parameters for opposite PSE Storage (Non-condensing): 0 to 95 % Input voltage Cold Start -35 C 42.5 57 V 44 57 V, 65 W range Operating Altitude 2000 m / 70 kPa 2x 25.50 W Power available 25.50 W Ingress Protection (ETH0, ETH1) IP30 Rating Maximum current 600 mA Insul. Strength 1.5 kV from the router none MECHANICAL Standards IEEE 802.3at-2009 (PoE+) and IEEE 802.3af-2003 (PoE) supported. Cabling needed is Category 5, up to 12.5 . It is possible to use a passive PoE Plastic or metal case with plastic or metal DIN rail injector Enclosure 55x97x125 mm Dimensions Weight Plastic 170 g Weight Metal 375 g GNSS SPECIFICATIONS Antenna 50 Ohms active Protocols NMEA 0183 v3.0 Frequency GPS 1575.42MHz Typical Frequency GLOBASS 1597.551MHz Min. 1605.886MHz Max. Tracking Sensitivity Active antenna or LNA: -159 dBm (Open sky) Passive antenna: -156 dBm Acquisition Sensitivity Active antenna or LNA: -149 dBm (Open sky) Passive antenna: -145 dBm Cold Start Sensitivity -145 dBm Warm start: 29 s Max. Acquisition time (TTFF) Cold start: 32 s Max.